Advertisement
Transmitter Unit (Local End Connection)
(TX – Front Panel)
a. Power LED (Lit when power is on)
b. Link LED (Lit when link is on)
c. USB keyboard connector
d. USB mouse connector
e. Select button for Receiver Mode (View only/Full Access/Access Denied)
f.
Video LED (lit when Remote Console monitor is on)
g. Control LED (Lit when Control of Remote Console is on)
(TX – Back Panel)
h. Power Jack (DC5V, centre-positive)
i.
CAT5 Extension Port (RJ-45, connected to the Receiver Unit via a CATx UTP cable up to 300mtr max)
j.
Computer port (HD15 VGA, connected to the local computer using included 3 in 1 KVM cable)
k. Upgrade port (USB type B, dedicated for firmware upgrade)
l.
Console Video port(HD15 VGA, connect to monitor)
Receiver Unit (Local End Connection)
(RX – Front Panel)
a. Power LED (Lit when power is on)
b. Link LED (Lit when link is on)
c. USB keyboard connector
d. USB mouse connector
e. Select button for Local / Remote Computers
f.
Local Computer LED (Lit when local computer active)
g. Remote Computer LED (Lit when Remote computer active)
Advertisement
