WowWee Groove Cube Shutter 1440 Instruction Manual

Assortment No.: 1440/1450
Contents: 1 x Groove Cube™ Shutter; 1 x USB Cable; 1 x Lanyard; 1 x Instruction Manual
The Groove Cube™ Shutter mini Bluetooth
handsfree phone call functions, Remote Shutter Button for your smart device's camera and comes with a lanyard and jack pin to attach to your device.

Features

● Size 26.8 x 26.8 x 28.5mm [1.05 x 1.05 x 1.12 inches]
● Bluetooth music playing
®
Micro USB Cable
Lanyard
1. Push Button: Power/Play/Pause/Answer Calls
● Press and hold the Push Button to power On/Off.
● Press the button to Pause when music is playing.
● Press the button to answer incoming calls when the device is paired with a phone.
Press again to end call.
2. Remote Shutter Button
● Activate the device's camera. Press the Remote Shutter Button (2) to take pictures.
NOTE: Ensure Bluetooth
®
3. Bluetooth Indicator Light:
®
● Rapid Flashing (2/s) Green LED light indicates that the speaker is in Bluetooth
Searching and Pairing Mode.
● Slow Flashing (1/s) Green LED light indicates that the phone is successfully paired.
Pairing:
● Press and Hold the Push Button until you hear the start-up chime. The Green LED
light will be ashing rapidly.
● Switch on your Bluetooth
®
on your screen. When 'GC Shutter' appears on your device, select and pair with the
speaker.
● When the pairing is complete, you will hear a message and the Green LED light will
ash slowly.
Power On\Off:
Power ON: Press the Power Button (1) and hold until a beeping sound is heard and
the Green light ashes quickly.
To turn OFF: Press the Power Button and hold, "Power Off" will sound and the Green
light will switch off.
Note: It is strongly recommended that you turn off the speaker whilst not in use.
INSTRUCTION MANUAL
speaker is small in size, but a powerful multi-functional device. It supports Bluetooth
®

EASY OPERATION

Groove Cube™ Shutter
5
2
is connected. Can be activated whilst music is playing.
smart-device/phone and wait until 'GC Shutter' shows up

Charging:

• Fully charge the speaker prior to rst use.
• Plug the Micro USB cable into the USB ports.
• The Red LED light will turn on to indicate the
device is charging.
• The Red LED light switching off indicates that
charging is complete.
WowWee Group Limited.
WowWee Canada Inc.
Customer Service:
• Bluetooth handsfree phone call functions
®
• Bluetooth Remote Shutter Button
®
6
4
1
3
®
Manufactured and distributed by
© 2014 WowWee Group Limited.
All Rights Reserved.
Energy Plaza, 301A-C, 92 Granville Road
T.S.T. East, Hong Kong
3700 Saint-Patrick Street, Unit 206, Montreal
QC H4E 1A2, Canada
www.wowweezone.com
● Lanyard and jack pin to attach to device
7
4. Charge Indicator Light
● Constant Red LED light whilst the device is charging.
● The indicator light will switch off when fully charged.
5. Microphone
6. Lanyard Hole
7. Micro USB Port (Power Input)
8. Speaker
Bluetooth Smart-Device/Phone Pairing:
®
Please ensure the device to which you are pairing with
has Bluetooth capabilities.
®
1. Make sure that the speaker is turned off.
2. Place the speaker and the device in proximity so that
both devices are in view.
3. Press and hold the Power Button until speaker power
is ON. A Green LED light will ash rapidly.
4. To active the Bluetooth mode and functions on your
®
phone or device, see the instructions for that device.
5. Set the phone or device to search for Bluetooth
devices and select the speaker.
6. When the pairing is complete, the Green LED light
will ash slowly. The speaker is now ready for
listening to music, answering calls, or taking pictures.
Note: Some mobile phones or other devices may pair
automatically when re-started.
music playing, Bluetooth
® ®
8
®