VXi BlueParrott Xpressway User Manual

OPERATIONS GUIDE

MODES OF OPERATION

TURN ON
TURN OFF
PAIRING
ON - NO BLUETOOTH CONNECTION
ON - BLUETOOTH CONNECTED
MAKE A CALL
END A CALL
ANSWER A CALL
VOICE DIAL - ACTIVATE / DEACTIVATE
REJECT A CALL
LAST NUMBER REDIAL
CALL WAITING - ANSWER / SWITCH BETWEEN CALLS
CALL WAITING - END CALLS
TRANSFER AUDIO WHILE ON A CALL
SEND CALL ON HOLD TO VOICE MAIL
VOLUME UP / VOLUME DOWN
MUTE / UNMUTE
TURN LEDS (LIGHTS) OFF / ON
MULTIPOINT CONNECTION * - ENABLE
REESTABLISH LOST BLUETOOTH CONNECTION WITH
PHONE (PHONE IS ALREADY PAIRED AND TURNED ON)
LOW BATTERY WARNING
CHARGING IN PROCESS
CHARGING COMPLETE
* A Multipoint Connection allows connection of two devices to the headset at the same time. For example, this could be two cell phones, or a phone and a VoIP dongle.

TIPS

Keep microphone positioned near the corner of your mouth. Correct positioning ensures that the noise-canceling
=
technology works properly.
If you have not used the headset for an extended period, charge the headset for 3½ hours before using.
=

HOW TO REPLACE THE AUTO CHARGER FUSE

If the green indicator light on the auto adapter (located next to the USB port) does not light up when plugged into the
power source, check the charger's inline fuse. Replace with 2A 250V Fast-Blow glass fuse (3AG) if necessary. Fuses are
available at most automotive stores. To replace, unscrew the tip of the auto adapter (see photo, right) and remove the
fuse. Put new fuse in and screw the tip back on.
FCC NOTICE TO USERS; This part complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation. Users are not permitted to make changes or modify the device in any way. Changes or modifications not approved
by VXi Corporation will void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by
one or more of the following measures: - Reorient or relocate the receiving antennae - Increase the separation between the equipment and the receive - Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
CANADA / IC NOTICE TO USER: Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation of the device. This device complies with RSS-210 of Industry Canada. This Class B digital apparatus complies with Canadian ICES-003 (Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada).
VXI WARRANTY:
1. VXi warrants that your Xpressway headset system will be free from defects in material and workmanship for one year from the date of purchase. If, during the first year from the date of
purchase, your Xpressway headset system fails to work due to a defect in material or workmanship, VXi will repair or replace the product, at its election, free of charge. Without proof of purchase,
the warranty period begins on the date of manufacture. Consumable components (for example, cushions, battery and fuse) are not included in this one-year warranty.
2. The foregoing limited warranty does not cover equipment failure attributable to accident, improper operation, misuse, abuse, or any cause other than defects in the materials or workmanship
of VXi's products.
3. VXi's obligations under this warranty are limited to repair or replacement (at our option) of any defective part returned to VXi at the customer's expense. Returned products require a Return
Authorization that may be obtained by calling 1-800-742-8588. Products returned to VXi for repair under this warranty will be return shipped to the customer at VXi's expense.
4. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some
jurisdictions do not permit the exclusion of implied warranties and the foregoing exclusions may not apply to you.
5. In no event shall VXi be responsible for any other damages whatsoever, including direct, indirect, special, incidental, consequential, or other damages for breach of this or any other warranty,
express or implied.
VXi Corporation, 271 Locust Street, Dover, NH 03820 USA 1-800-742-8588 / 603-742-2888 / www.vxicorp.com / www.blueparrott.com
BUTTON PRESS
MFB - 3 second press
MFB - 4 second press
MFB - 6 second press
NA
NA
Dial from keypad or use Voice Dial
MFB: 1 tap
MFB: 1 tap during ring tone
MFB: 1 tap
MFB: 1 second press during ring
tone
1 second press of Volume Down
button
MFB: 2 quick taps
MFB: 1 tap to end active call. Tap
once again to answer call on hold.
Tap once more to disconnect
second caller
1 second press of Volume Down
button
MFB: 1 second press
Tap Volume Up or Volume Down
button
1 second press of Volume Up
button
Tap Volume Up and Volume Down
buttons at the same time
Tap MFB, Volume Up and Volume
Down buttons all at the same time
MFB: 1 tap
NA
NA
NA
PN202556C ©2009 VXi Corporation Printed in China
LIGHT INDICATORS
Blue flashes
Red flashes
tone when Bluetooth disconnected
Blue quickly flashing 2 notes rising, followed by 4 notes
Blue double blink
Blue flashing slowly
NA
NA
NA
NA
NA
NA
NA Beep heard when call is incoming
NA Call on hold will ring the headset
NA
NA
NA
NA
Lights go out
NA
Blue flashing slowly
Red flashes
Red (not flashing)
Green (not flashing)
AUDIO INDICATORS
2 notes rising, followed by short
tone when Bluetooth
connected
2 notes falling, followed by short
rising
NA
NA
NA
2 notes falling
2 notes rising
1 beep
2 notes falling
1 beep
after the active call
is disconnected
1 Long tone
Long tone
1 beep each time tapped
1 beep. Short beep every 10
seconds while muted
NA
4 notes rising
NA
Long tone / 30 sec.
NA
NA
Unscrew
Tip
Indicator
Light