Related Manuals for Longshine AD1040
Summary of Contents for Longshine AD1040
- Page 1 IBAYT-PBL3 (motherboard card) AD1040 (daughter card) Intel® Bay Trail SOC Atom™ J1900 Startup Manual V1.0...
-
Page 2: Safety Declaration
LONGSHINE Technology GmbH. Information provided in this manual is intended to be accurate and reliable. However, LONGSHINE Technology GmbH assumes no responsibility for its use, nor for any infringements of the rights of third parties, which may result from its use. - Page 3 The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. LONGSHINE Technology GmbH disclaims all responsibility for the accuracy of any statements contained herein.
-
Page 4: General Introduction
1. General Introduction Product Overview IBAYT-PBL3 is designed with Intel® Celeron™ J1900 SoC for industrial applications that request performance computing and reliable stability. The motherboard has on board CPU Intel® Celeron™ J1900 Quad core 2.0 GHz. IBAYT-PBL3 has rich I/O connectivity with PS/2, COM port, LAN, USB port and audio Jack integrated in a customerized form factor. - Page 5 External IO Ports Serial Port External: 4 x RS-232 Ports (RJ45 type) COM1/2/3/4 0V/+5V/+12V power output by BIOS adustable; default 0V 4 x USB 2.0 USB Port Cash Drawer Port 1 x RJ-11 +12/+24V power output by BIOS adjustable; default +24V Keyboard/ Mouse 1 x PS2 (Keyboard/Mouse Auto Detection) LAN Port...
-
Page 6: Platform Features And Benefits
Platform Features and Benefits Integrated Gfx (Intel® HD Graphics) supports embedded hardware decode accelerator deliver 1080p HD video stream with excellent performance. DirectX® 11.1 & Open GL 4.0 let you enjoy awesome graphics performance, stunning 3D visual effect and dynamic interactivity Memory support low voltage DDR3 memory controller Operating system support: –... -
Page 7: Before You Proceed
2. Product Introduction / Installation Before you Proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. Caution! Unplug the power cord from the wall socket before touching any component. Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity Hold components by the edges to avoid touching the ICs on them. - Page 8 2.2.3 Motherboard Layout IBAYT-PBL3 Top side: IBAYT-PBL3 Bottom side:...
- Page 9 2.2.4 Daughterboard Layout AD1040 TOP side: 2.2.5 Jumper Content and Function List Jumpers: Label Function Note JATX1 ATX/AT SELECTION AT mode ATX mode(default) JVDD2 1-3 (default): 3.3V 2-4 (default): 3.3V 3-5: 5V 4-6: 5V JLVDS2 Power select For LVDS2_VDD For JBKLVOL2...
-
Page 10: Serial Port Connector
2.2.6 MB Internal Connector and PIN Definition Label Function Note 1.GND CPU_FAN 2.12V 3.CPUFAN_DEC 4.CPUFAN_PWM PIN1 : +5VSB JFP1 PIN2 : PWR_LED# PIN3 : PANSWIN# PIN4 : GND PIN5 : PMC_RST_BTN#_D PIN6 : GND JLVDS1 PIN1 : +12V_BL PIN21: LVDSA_N3 PIN2 : +12V_BL PIN22: LVDSA_N2 PIN3 : LVDS1_VDD L... - Page 11 PIN1: +5V JTOUCH1 PIN2: +3.3V PIN3: TOUCH_232_RXD PIN4: TOUCH_232_TXD PIN5: GND JLVDS2 PIN1 : Conv_SRC PIN16 : LVDS2A_N2 PIN2 : LVDS2A_P3 PIN17 : LVDS2_VDD PIN3 : Conv_SRC PIN18 : GND LVDS Connector PIN4 : LVDS2A_N3 PIN19 : LVDS2_VDD PIN5 : BL_EN2 PIN20 : LVDS2A_P1 PIN6 : GND...
- Page 12 JRTC1 PIN1 : CK_25M_SIO_R JTPM1 PIN2 : +3.3VSB PIN3 : PLTRST_TPM# PIN4 : +3.3V PIN5 : LPC_AD0 PIN6 : LPC_SERIRQ_R PIN7 : LPC_AD1 PIN8 : +5V PIN9 : LPC_AD2 PIN10 : NC PIN11 : LPC_AD3 PIN12 : GND PIN13 : LPC_FRAME# PIN14 : GND PIN1: NC PIN7: LPC_FRAME#...
- Page 13 PIN11 : LVDS2_DETECT#_C PIN26: LVDS2A_P0 PIN12 : GND PIN27: LVDS2_EDID_CLK PIN13 : GND PIN28: LVDS2A_N0 PIN14 : LVDS2A_P2 PIN29: GND PIN15 : GND PIN30: GND PIN1 : +12V PIN21: LVDSA_N3 JLVDS_IN_40P PIN2 : +12V PIN22: LVDSA_N2 PIN3 : LVDS1_VDD PIN23: GND PIN4 : +12V PIN24: GND...
- Page 14 TOUCH2 PIN1: THY+ PIN2: THY- PIN3: THOROBE_R PIN4: THX- PIN5: THX+ JUSB2_RESV PIN1: GND PIN2: USB_HB_CM_N4 PIN3: USB_HB_CM_P4 PIN4: +5V_USB789 JTOUCH1 PIN1 : +5V_RS232 PIN2 : +3.3V PIN3 : 232_RX PIN4 : 232_TX PIN5 : GND COM0_IN/ PIN1 : COM1_DCD# COM1_IN PIN2 : COM1_RXD PIN3 : COM1_TXD...
-
Page 15: Bios Setup Program
3. BIOS Setup Program This motherboard supports a programmable firmware chip that you can update using the provided utility. Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to “Run Setup.” This section explains how to configure your system using this utility. -
Page 16: Legend Box
Legend Box The keys in the legend bar allow you to navigate through the various setup menus Key(s) Function Description Select Screen →← Select Item ↑↓ Enter Select Change Opt. General Help Previous Values Optimal Defaults Save and Exit Exit List Box This box appears only in the opening screen. -
Page 17: Bios Menu Screen
BIOS Menu Screen When you enter the BIOS, the following screen appears. The BIOS menu screen displays the items that allow you to make changes to the system configuration. To access the menu items, press the up/down/right/left arrow key on the keyboard until the desired item is highlighted, then press [Enter] to open the specific menu. -
Page 18: Main Setup
3.1 Main Setup This menu gives you an overview of the general system specifications. The BIOS automatically detects the items in this menu. Use this menu for basic system configurations, such as time, date etc. BIOS Information Displays the auto-detected BIOS information. System Date The date format is <Date>,<Month>,<Day>,<Year>. -
Page 19: Advanced Bios Setup
3.2 Advanced BIOS Setup Select the Advanced tab from the setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as Chipset configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>... -
Page 20: Acpi Settings
ACPI Settings Enable Hibernation [Enable] Enable or Disable system ability to hibernation. ACPI Sleep State [S3 (Suspend to RAM)] Select the highest ACPI sleep state the system will enter the SUSPEND button is press. Configuration options: [Suspend Disable] [S3 (suspend to RAM )]... -
Page 21: Super Io Configuration
Super IO configuration Serial Port 1~7 Configuration Set Parameters of Serial Port 1~7... - Page 22 Serial Port [Enable] Enable or Disable Serial Port Change Settings [Auto] Select an optimal setting for Serial Port. You can decide IO and IRQ by yourself. Suggest to leave this option “Auto” COM1~7 Voltage [0V] Select 0V, 5V, 12V voltage for serial port Parallel Port Configuration: Parallel Port [Enable] Enable or Disable Parallel Port (LPT/LPTE)
- Page 23 CASH Drawer Voltage: Select 0V, 12V, and 24V for cash drawer device Cash Drawer Control in GPIO port: Open Drawer Write “87”h to I/O Port “2E”h Write “87”h to I/O Port “2E”h Write “07”h to I/O Port “2E”h Write “07”h to I/O Port “2F”h Write “E5”h to I/O Port “2E”h Write “00”h to I/O Port “2F”h Close Drawer...
- Page 24 Write “07”h to I/O Port “2E”h Write “07”h to I/O Port “2F”h Write “E5”h to I/O Port “2E”h Read I/O “2F”h Definition(bit3) Deep Sleep Function]Disabled]: Select to Enable/Disable Deep Sleep S5 function. When select to Enabled, Only Power Button can power on the system...
-
Page 25: Pc Health Status
PC Health Status Display the system information including temperature and voltage. Smart Fan Function [Enable] Enable or Disable the Smart FAN Smart Fan Function When Enter this sub-menu. You can choose the mode of smart Fan. Option:[ Manual Mode][Thermal Cruise Mode]... - Page 26 Digital IO configuration You can configure Digital I/O pin1~3 this this sub-menu Case Open warning[Disable] Enable or Disable Case Open warning Configuration options: [Disabled] [Enabled] Watch Dog Timer[Disable] Enable or Disable watch dog timer function. After enabling this function, you can set watch dog timer count mode and time out value like below.
- Page 27 S5 RTC wake up setting Wake system from S5 [Disable] Enable or Disable system wake on alarm event. Select FixedTime, system will wake on the hr :min ::sec specified.. After you enable this funciton, you can see the screen like below.
- Page 28 PC Health Status Display Intel Trusted Execution Technology configuration.
-
Page 29: Ppm Configuration
Display CPU information Limit CPUID Maximum [Disable] Disable for Windows XP Configuration options: [Disable] [Enable] Execute Disable Bit [Enable] XD can prevent certain classes of malicious buffer overflow attacks when combined with a supporting OS(Windows server 2003 SP1, WindowsXP SP2, SuSE Linux 9.2, Redhat Enterprise 3 update 3.) Configuration options: [Disable] [Enable] Intel virtualization technology [Enable]... -
Page 30: Ide Configuration
IDE Configuration Display and set IDE related device configuration. Serial-ATA(SATA) [Enable] nable/Disable Serial ATA Configuration options: [Disable] [Enable] SATA Speed Support [Gen2] SATA speed support Gen1 or Gen2 Configuration options: [Gen1] [Gen2] SATA mode [IDE mode] Select IDE or AHCI Configuration options: [IDE mode] [AHCI mode] Serial-ATA Port1 [Enable] Enable/Disable Serial ATA port1... -
Page 31: Miscellaneous Configuration
Miscellaneous Configuration Display miscellaneous configuration. High Precision Timer [Enable] Enable or Disable the High Precision Event Timer Configuration options: [Disable] [Enable] OS Selection[Windows 7] OS selection Configuration options: [Win8.X] [Windows 7]... -
Page 32: Network Stack Configuration
Network Stack Configuration Network Configuration and setup Network Stack [Enabled] Enable/Disable UEFI Network Stack. Configuration options: [Enabled] [Disabled] Ipv4 PXE support [Enabled] Enable Ipv4 PXE boot Support. If disabled, IPV4 PXE boot option will not be created. Configuration options: [Enabled] [Disabled] Ipv6 PXE support [Enabled] Enable Ipv6 PXE boot Support. -
Page 33: Compatibility Support Module Configuration
Compatibility Support Module Configuration CSM Support [Enabled] Enable/Disable CSM Support Configuration options: [Enable] [Disable] GateA10 Active[Upon Request] Upon request-GA20 can be disabled using BIOS services. Always- Do not allow disabling GA20; this option is useful when any RT code is executed above 1MB. Configuration options: [Upon request] [Always] Option ROM messages[Force BIOS] Set Display mode for option ROM... -
Page 34: Usb Configuration
Storage[legacy] Controls the execution of UEFI and legacy Storage OpROM Configuration options: [Do not launch] [UEFI][Legacy] Video[legacy] Controls the execution of UEFI and legacy video OpROM Configuration options: [Do not launch] [UEFI][Legacy] Other PCI devices[legacy] Determine OpROM execution policy for devices other than Network, Storage, or Video Configuration options: [UEFI][Legacy] USB Configuration Legacy USB Support [Enabled]... - Page 35 Configuration options: [Enable] [Disable] EHCI hand-off[Enable] This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change should be claimed by XHCI driver. Configuration options: [Enable] [Disable] USB Mass storage[Enable] Enable/Disable USB mass storage driver support. Configuration options: [Enable] [Disable] USB Transfer time-out[20sec] The time-out value for Control, bulk, and interrupt transfers.
- Page 36 Driver healthy Provide the Health status of the drivers and controllers.
-
Page 37: North Bridge
3.3 Chipset North Bridge : Intel IGD configuration :... - Page 38 DVMT Pre-allocated [64MB] Select DVMT 5.0 Pre-allocate(Fixed0 Graphic memory size used by the internal graphic device. Configuration options: Min: [64M] to Max:[512M] DVMT Total Gfx Mem[256MB] Select DVMT 5.0 Total Graphic Memory size used by the Internal Graphic device. Configuration options: [128MB] [256MB][Max] Aperture size[256MB] Select the aperture size Configuration options: [128MB] [256MB][512MB]...
- Page 39 LCD control : Primary IGFX Boot [CRT] Select the Video Device which will be activated during Post. This has no effect if external graphics present. Secondary boot display selection will appear based on your selextion. VGA modes will be supported only on primary display. Configuration options: [VBIOS Default][CRT][eDP/LVDS1][DP/LVDS2] Secondary IGFX Boot[eDP/LVDS1] Select secondary display device.
-
Page 40: South Bridge
South Bridge :... - Page 41 Azalia HD audio : Audio Controller [Enable] Control Detection of the Azalia device. Disabled=Azalia will be unconditionally disabled. Enabled= Azalia will be unconditionally Enabled. Auto= Azalia will be enabled if present disabled otherwise. Configuration options: [Enable][Disable] Amplifier GAIN(db) Select Amplifier GAIN value onfiguration options: [15.3db][21.2db][27.2db][31.8db]...
- Page 42 USB configuration : XHCI Mode [Auto] Mode of operation of XHCI controller Configuration options: [Enable][Disable][Auto][Smart Auto] USB2 Link Power[Enabled] Enable/Disable USB2 Link Power management Configuration options: [Enabled][Disabled]...
- Page 43 High Precision Timer [Enabled] Enable or Disable the High precision Event Timer Configuration options: [Enable][Disable] Onboard LAN control[Enabled] Enable/Disable the LAN Configuration options: [Enabled][Disabled] Onboard LAN BootROM[Disabled] Enable/Disable the boot option for LAN controller Configuration options: [Enabled][Disabled] PCIE Wake [Disabled] Enable or disable PCIE to wake the system from S5 Configuration options: [Enabled][Disabled] Restore AC power loss[power off]...
- Page 44 3.4 Security Administrator Password Set setup Administrator Password User Password Set User Password...
- Page 45 3.5 Boot Setup Prompt Timeout [1] Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Bootup NumLock State [On] Select the keyboard NumLock state Configuration options: [On] [Off] Quick Boot [Disable] Enable or disable Quick Boot option Configuration options: [Disabled] [Enabled] Fast Boot [Disable] Enable or disable boot with initialization of a minimal set of devices required to launch...
-
Page 46: Save And Exit
3.6 Save & Exit Save changes and Exit Exit system setup after saving the changes. Discard changes and Exit Exit system setup without saving the changes. Save changes and Reset Reset the system after saving the changes. Discard changes and Reset Reset the system without saving the changes. - Page 47 Reset system with ME disable ModeMEUD000 ME will runs into the temporary disable mode, Ignore if ME ignition FWMEUD001.