Preparing for Installation
Installing A-Size VMEbus Modules (Agilent E1403C Only)
Chapter 2
Installation/Removal Instructions
This chapter shows how to install/remove B-size VXIbus modules into/from
the Agilent E1403C or Agilent E1407A C-Size Adapter Module, and how to
install/remove the adapter module into a C-Size VXIbus Mainframe.
The procedures in this chapter shows installation/removal of the Adapter
Note
Module into/from the Agilent E1401A High Power Mainframe. The
procedures for other mainframes are similar to these procedures.
•
Be sure to set the logical address of the module to be installed into the
adapter to the correct address (see the module manual).
•
Be sure to use clean handling and anti-static handling of the module.
•
Be sure there are no external connections to the modules.
Install A-Size VMEbus Modules only in the Agilent E1403C Adapter
Module. Use the following B-Size Module installation procedure to install
an A-Size Module into the adapter module.
Installation/Removal Instructions
Chapter 2
11