Replace Plastic Spacers - Whirlpool WOC54EC7HW Installation Instructions Manual

2. Install a foot on the left rear spacer using a #8-18 x
screw.
NOTE: Position the foot so the long side of the foot is facing
toward the top of the oven.
A. Spacer
B. Foot
C. #8-18 x
3. In the same manner, install a foot on the right rear of
the oven.
4. Install a front foot on the left front spacer using a
#8-18 x / " screw.
3
8
NOTE: Position the foot so the long side of the foot is
facing toward the inside of the oven.
A. Front foot
B. #8-18 x
C. Spacer
5. In the same manner, install a front foot on the right front of
the oven.
6
/ "
3
8
A
B
C
/ " screw
3
8
A
B
C
/ " screw
3
8
6. Using 2 or more people, place the oven in its upright
position.
7. Go to the "Make Electrical Connection" section in the
Installation Instructions provided with your built-in oven.

Replace Plastic Spacers

1. Remove the screw attaching the plastic spacer (A) to the
right side of the oven.
2. Using the screw removed, install a new plastic spacer (B)
provided with this kit.
A
B
A. Plastic spacer
B. New plastic spacer
3. In the same manner, remove and replace the plastic spacer
on the left side of the oven.
New plastic spacer