Table of Contents
Advertisement
10) DMX Recorder
This is the tab where you can record custom DMX files and save them to the system for playback. It
requires a PathPort DMX to Ethernet device to function. You set the DMX channel you want to use to
start and stop the recorder. Using external lighting console or software, you program that trigger
channel to go on at the beginning of the lighting sequence and go low when finished. The name of the
file will be saved to the system so you can assign it to play with the video scene/file that has the same
name. An example is test.dmx would play with test.mov when called to play. You will need to connect
the ENTTEC DMX dongle to the Master player only. Slaves do not support DMX playback at this time.
Advertisement
Table of Contents
