Printekmobile VehiclePro 400 Quick Start Manual

VehiclePro 400
This guide provides information on the daily use of the VehiclePro 400 printer.
For additional information, please refer to the VehiclePro 400 Operator's Manual.
Printer Features
Status
Paper Feed
Indicator
Button
Loading Paper
Pull Handle
Push paper door release, pull out drawer using the pull handles, drop in
paper roll and route through door as shown.
Note: Always use pull handles to open the drawer.
Printouts can be torn off in either direction.
© 2015 Printek LLC. A
Quick Start Guide
Paper Door
Release
PUSH
Tear Bar
Pull Handle
Drivers, User Manuals, and Software Utilities available @ www.printek.com
company. 1517 Townline Road, Benton Harbor, MI 49022 PH: 269-925-3200 FX: 888-211-3400 Part 7564 Rev D
Status Indications – Patterns & Meanings
Green
Green
Green
Green/Orange
Without Alarm
Green/Orange
With Alarm
= Off = On
*Note: Automatic power on depends on printer installation.
Printer Self-Test and Configuration Printout
•
Turn off printer power
•
While pressing and holding Paper Feed button, turn on power
•
Printer will make two quick beeps
•
Release Paper Feed button and configuration page will print
Printer is Off.
Printer is On.*
Printer is in Standby. (Will wake on
receipt of data.)
Printer is receiving data and/or printing,
or is in Setup mode.
Paper out or Paper Door is open.
Paper out. (Load paper and press Paper
Feed to clear).
= Slow Blink = Fast Blink