4. (SEE FIGURE 4) Place hose reel (4) into frame assembly (1). Insert end of crank stem from hose
reel (4) onto crank handle (5). Align crank handle (5) mounting holes with crank stem mounting
holes.
5. (SEE FIGURE 5) Insert bolt (11) through inside hole of crank stem and crank handle hole, loosely
fasten with lock nut (12). Insert bolt (11) through outside hole of crank stem and crank handle hole
Tighten all fasteners securely.
6. (SEE FIGURE 6) Attach hose coupling end of hose reel (4) to frame (1), using U-Bracket. Fasten
U-bracket to frame with carriage bolts (9) and lock nuts (12)(13). Tighten securely.
Page of 9
5