Teletronics International TT 900 Quick Product Manual

Warranty Policy
2 Choke Cherry Road, Rockville, MD 20850 Tel: 301.309.8500 Fax: 301.309.8851
Limited Warranty
All Teletronics' products warranted to the original purchaser to be free from defects in materials and
workmanship under normal installation, use, and service for a period of one (1) year from the date of
purchase. Under this warranty, Teletronics International, Inc. shall repair or replace (at its option), during the
warranty period, any part that proves to be defective in material of workmanship under normal installation,
use and service, provided the product is returned to Teletronics International, Inc., or to one of its distributors
with transportation charges prepaid. Returned products must include a copy of the purchase receipt. In the
absence of a purchase receipt, the warranty period shall be one (1) year from the date of manufacture.
This warranty shall be voided if the product is damaged as a result of defacement, misuse, abuse, neglect,
accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair,
alteration or maintenance by any person or party other than a Teletronics International, Inc. employee or
authorized service facility, or any use in violation of instructions furnished by Teletronics International, Inc.
This warranty is also rendered invalid if this product is removed from the country in which it was purchased, if
it is used in a country in which it is not registered for use, or if it is used in a country for which it was not
designed. Due to variations in communications laws, this product may be illegal for use in some countries.
Teletronics International, Inc. assumes no responsibility for damages or penalties incurred resulting from the
use of this product in a manner or location other than that for which it is intended.
IN NO EVENT SHALL TELETRONICS INTERNATIONAL, INC. BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED,
WHATSOEVER.
Some states do not allow the exclusion or limitation of special, incidental or consequential damages, so
the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and
you may also have other rights that vary from state to state.
RMA Policy
Product Return Policy
It is important to us that all Teletronics' products are bought with full confidence. If you are not 100%
satisfied with any product purchased from Teletronics you may receive a prompt replacement or refund,
subject to the terms and conditions outlined below.
IMPORTANT: Before returning any item for credit or under warranty repair, you must obtain a Return
Merchandise Authorization (RMA) number by filling out the RMA form. Products will not be accepted without
an RMA number. All products being shipped to Teletronics for repair/refund/exchange must be freight
prepaid (customer pays for shipping). For all under warranty repair/replacement, Teletronics standard
warranty applies.
30-Day full refund or credit policy:
I. Product was purchased from Teletronics no more than 30 day prior to the return request.
II. All shipping charges associated with returned items are non-refundable.
III. Products are returned in their original condition along with any associated packaging, accessories,
mounting hardware and manuals. Any discrepancy could result in a delay or partial forfeiture of your credit.
Unfortunately Teletronics cannot issue credits for:
I. Products not purchased from Teletronics directly. If you purchased from a reseller or distributor
you must contact them directly for return instructions.
II. Damaged items as a result of misuse, neglect, or improper environmental conditions.
III. Products purchased direct from Teletronics more than 30 days prior to a product return request.
To return any product under 1 year warranty for repair/replacement, follow the RMA procedure.
All Rights Reserved. Copyright 2006 Teletronics International, Inc.
Quick Product Guide
Mechanical Specifications:
Dimensions (enclosure-outside): 7.5" x 9" x 2.75"
Dimensions (enclosure-inside): 7" x 7.5" x 2"
Board Specifications:
Ethernet: 10/100BaseT Ethernet, Auto MDI/MDI-X
Network Architecture Infrastructure: Ad-Hoc, MAC, CSMA/CA
Status Indicators: Power, Wireless LAN, Ethernet LAN, and RSSI
Push Button: Reset to Default Button
Standard Compliance:
IEEE 802.11b/g
Output Power (200mW):
23 dBm (+/- 1.5dB) @ 1-24 Mbps
22 dBm @ 36 Mbps
21 dBm @ 48 Mbps
20 dBm @ 54 Mbps
Receiver Sensitivity:
-92 dBm @ 6 Mbps
-72 dBm @ 54 Mbps
RF Channels:
2 Channels: 913, 918 MHz
Data Security:
WPA, WPA2 & 64/128 bit WEP Data Security,
MAC Address Filter, Intra-BSS Traffic Blocking
(Layer 2 Isolation)
Fully Transparent Bridge:
Bridge Layer 2 in AP + WDS mode only,
Bridge Layer 2.5 in SU mode
Management:
Web and SNMP Based Management, EZManager
Antenna Connector:
N Type Female
DC Power Input:
Includes 48VDC Adapter and PoE Injector w/surge
protection IEE 802.3af compliant
Operating Environment and Weight:
-40 °C to + 70 °C and 5.5 lbs
TT 900
IEEE 802.11b/g
BRIDGE
Item# 11-411 SU
Item# 11-412 AP
TT™900 FEATURES
Web & SNMP based Managment
EZManager, Adjustable Transmit
Power TX, VLAN Transparent
Support, Intra-BSS Traffic
Blocking (Layer 2 Isolation),
Configurable ACK Timeout for long
distance, Ruggedized waterproof
and all weather enclosure, WDS
available in AP mode, Industrial
Grade Components, Power Surge
Protection, RoHS Compliance
Package List
1.
TT™900 802.11b/g (1)
2.
IEEE 802.11b/g Mini PCI Card (1)
3.
Power Over Ethernet Injector (1)
4.
48VDC Power Adapter (1)
5.
Ethernet Cable (2)
6.
Waterproof RJ-45 Connector (1)
7.
Mounting Hardware (1)
8.
Quick User Guide