Advertisement
Quick Links
U N I Q U E
E L I T E
3 0 E & 3 6 E
13
To reduce the risk of
tipping the appliance by
abnormal
improper door loading,
the appliance must be secured by properly
installing the anti-tip device packed with
the appliance. To check if the device is
installed and engaged properly, carefully
tip the range forward. The anti-tip device
should engage and prevent the range
from tipping over.
If this range is removed for any reason,
(eg. service or cleaning), it must be
replaced as outlined before placing the
range back in operation.
Levelling a Free-Standing Range
All free-standing ranges must be level to
obtain proper cooking results. The
leveling legs should be screwed into the
corner brackets. Place pan or measuring
cup partially filled with water or a level on
the oven rack. Adjust the leveling legs
until the range is level. The top of the
aside panels should be level with the
counter top.
usage
or
Advertisement
Summary of Contents for Unique ELITE 30E
- Page 1 U N I Q U E E L I T E 3 0 E & 3 6 E To reduce the risk of tipping the appliance by abnormal usage improper door loading, the appliance must be secured by properly installing the anti-tip device packed with the appliance.
- Page 2 U N I Q U E E L I T E 3 0 E & 3 6 E GAS CONNECTIONS (All Units) NOTICE TO MASSACHUSETTS APPLIANCE DEALERS: Be sure this document is included in all gas range appliances sold to consumers in the State of Massachusetts.
-
Page 3: Installation
U N I Q U E E L I T E 3 0 E & 3 6 E The appliance and its individual shut-off valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of ½... - Page 4 U N I Q U E E L I T E 3 0 E & 3 6 E orifices included in the packaging). When using this on NG gas, conversion must be made by a qualified NG installer before attempting to operate the range on that gas For correct operation, the pressure of natural gas supplied to the regulator should be between 4”...
-
Page 5: After Installation
U N I Q U E E L I T E 3 0 E & 3 6 E After installation: 1. Check ignition of cooktop burners. 2. Check ignition of oven burner. 3. Check ignition of broil burner 4. Check ignition of griddle burner (36E model only) 5.