APEXi DIN 3 METER Instruction Manual

ELECTRONICS TECHNOLOGY ELECTRONICS TECHNOLOGY ELECTRONICS TECHNOLOGY ELECTRONICS TECHNOLOGY ELECTRONICS TECHNOLOGY ELECTRONICS TECHNOLOGY
ELECTRONICS TECHNOLOGY ELECTRONICS TECHNOLOGY ELECTRONICS TECHNOLOGY ELECTRONICS TECHNOLOGY ELECTRONICS TECHNOLOGY ELECTRONICS TECHNOLOGY
Instruction Manual Instruction Manual Instruction Manual
Thank you for purchasing the A'PEXi DIN 3 Meter Thank you for purchasing the A'PEXi DIN 3 Meter Thank you for purchasing the A'PEXi DIN 3 Meter Thank you for purchasing the A'PEXi DIN 3 Meter 。 。 。 。 Please read through this Please read through this Please read through this Please read through this
Instruction Manual thoroughly to operate this product correctly and keep it Instruction Manual thoroughly to operate this product correctly and keep it
Instruction Manual thoroughly to operate this product correctly and keep it Instruction Manual thoroughly to operate this product correctly and keep it
near the product so that you may refer to it whenever necessary. If you near the product so that you may refer to it whenever necessary. If you near the product so that you may refer to it whenever necessary. If you near the product so that you may refer to it whenever necessary. If you
transfer the product to another customer, be sure to attach this Instruction transfer the product to another customer, be sure to attach this Instruction transfer the product to another customer, be sure to attach this Instruction transfer the product to another customer, be sure to attach this Instruction
Manual and the warranty information to the product. Manual and the warranty information to the product. Manual and the warranty information to the product. Manual and the warranty information to the product.
Product Name DIN ３ Meter
Product Code 4０９-A0０３
Application This device measures the following vehicle parameters.
Engine Oil, Differential Oil, or Water Temperature
Engine Oil Pressure
Applicable Vehicle DC10V～16V Body Earth Vehicle
Operating Temperature ±0～+60℃
Before
This Instruction Manual is intended to be used for the A'PEXi
DIN 3 Meter. Please also refer to the Instruction Manual for the
Instillation
Sensor Unit that supports this product.
and Use
Version Information
No. Date of Issue Instruction Manual Ver. ＃ Notes
1 June 1, '12 7207-0360-00 １
2 Apr 21, '14 7207-0360-01 ２
3 Feb 19, '15 7207-0360-02 3
Contact
Apex Co.,Ltd. Apex Co.,Ltd.
Apex Co.,Ltd. Apex Co.,Ltd.
9-1 Matsugi Hachioji-City,Tokyo,192-0362 Japan.
Tel :+81-42-678-7130 Fax:+81-42-678-7131
Apex Integration Inc. Apex Integration Inc. Apex Integration Inc. Apex Integration Inc.
1449 West Orenge Grove Avenue, Suite#A,Orange, CA 92868 USA
Tel :+1-714-685-5700 Fax:+1-714-685-5701
©Apex Co., Ltd. Printed in Japan
● It is strictly prohibited to reproduce or copy any portion of this manual. This manual may not be
used for any other purposes than personal use without expressed written consent of A'PEXi.
●We are not responsible for any losses resulting from data memory loss caused by faulty installation,
accidents, or any other factors.
●A'PEXi reserves the right to improve and change optional parts, part numbers, prices, and
configurations without prior notice.
２ ２ ２ ２ Safety Precautions Safety Precautions Safety Precautions Safety Precautions
Please read "Safety Precautions" carefully to operate the product with safety.
Keep the instruction manual in hand and refer to it whenever needed.
The instruction manual describes the items that you must observe prior to
installation and use of this product to avoid possible problems and damage which
would be caused by improper installation and use. The meanings of pictorial
indications by caution marks (signal words) are shown below. Please understand
their contents correctly before starting to read the text of this instruction manual.
■GLOSSARY
Display Meanings Display Meanings
Potential hazard that can
Potential hazard that can
result in slight injury or
result in death or serious
medium damage
！ injury of the operator or a ！
operator, third person, or
third person if the product
vehicle if
is wrongly operated in
WARNING WARNING WARNING WARNING CAUTION CAUTION CAUTION CAUTION manual is
disregard of this indication.
correctly.
！
WARNING
● ● ● ● Discontinue use of this product immediately if any unusual odor or smoke comes from Discontinue use of this product immediately if any unusual odor or smoke comes from Discontinue use of this product immediately if any unusual odor or smoke comes from Discontinue use of this product immediately if any unusual odor or smoke comes from
the unit. the unit. the unit. the unit. Failure to do so may result in electrical shorts and potential engine fire. Please consult
with your distributor or nearest local installation shop.
● ● ● ● Always remove the negative terminal Always remove the negative terminal（ （ （ （ - - - - ） ） ） ） of the battery before attempting installation. Always remove the negative terminal Always remove the negative terminal of the battery before attempting installation. of the battery before attempting installation. of the battery before attempting installation.
Failure to do so may result in electrical fires and engine fires resulting in damaged products. After
installation with the negative battery terminals disconnected, recorded ECU memory, idling learning
system, anti-theft systems, vehicle radio security systems, etc. may be reset. In this case please refer
to your vehicle's factory owner's manual for further information.
● Always wire this unit up according to the instruction manual. Always wire this unit up according to the instruction manual. Always wire this unit up according to the instruction manual. Always wire this unit up according to the instruction manual. Failure to do so may result in
electrical fire, improper unit/ vehicle operation｡
● Mount this product securely. Mount this product securely. Mount this product securely. Mount this product securely. Do not install nor mount the product in an unstable location that
may interfere with driving which can result in an accident.
● Never operate this unit while driving. Never operate this unit while driving. Never operate this unit while driving. Never operate this unit while driving. This may interfere with driving operations which can
result in unexpected accidents and/or problems.
● Do not and install and use this product and its accessories for any other purpose than Do not and install and use this product and its accessories for any other purpose than Do not and install and use this product and its accessories for any other purpose than Do not and install and use this product and its accessories for any other purpose than
the one specified by A'PEXi in this manual. the one specified by A'PEXi in this manual.
the one specified by A'PEXi in this manual. the one specified by A'PEXi in this manual. In this case, we shall disclaim all responsibility for
any damage or loss to the customer or third persons from improper usage of this product.
！
CAUTION
● ● ● ● This product should only be installed by a trained professional installer. This product should only be installed by a trained professional installer.
This product should only be installed by a trained professional installer. This product should only be installed by a trained professional installer. Installation requires
past experience, technical knowledge and skill to prevent damage to the unit and vehicle.
● ● ● ● Never disassemble or tamper with this unit. Never disassemble or tamper with this unit. Never disassemble or tamper with this unit. Never disassemble or tamper with this unit.
Failure to do so may lead to electrical short circuits
and electrical fires resulting in product and engine damage.
● Do not drop this product or expose it to excessive shock. Do not drop this product or expose it to excessive shock. Do not drop this product or expose it to excessive shock. Do not drop this product or expose it to excessive shock. Failure to do so may result in
product malfunction and engine damage.vehicle.
● ● ● ● Do not operate this unit in excessively hot or high Do not operate this unit in excessively hot or high Do not operate this unit in excessively hot or high Do not operate this unit in excessively hot or high- - - - temperature vehicle interiors that are temperature vehicle interiors that are temperature vehicle interiors that are temperature vehicle interiors that are
not air- - - - conditioned during hot weather seasons. not air not air not air conditioned during hot weather seasons. conditioned during hot weather seasons. conditioned during hot weather seasons. Failure to do so may result in unit
malfunction, thereby resulting in damage to the product and the vehicle.
● ● ● ● Keep this unit away from direct water and sunlight. Keep this unit away from direct water and sunlight. Keep this unit away from direct water and sunlight. Keep this unit away from direct water and sunlight. Failure to do so may result in electrical
shorts causing product and vehicle damage.
● ● ● ● Be sure to perform installation of unit parts when engine bay area is at cool Be sure to perform installation of unit parts when engine bay area is at cool Be sure to perform installation of unit parts when engine bay area is at cool Be sure to perform installation of unit parts when engine bay area is at cool
temperatures. temperatures.
temperatures. temperatures. Failure to do so may result in burning oneself.
１ １ １ １ Parts List Parts List Parts List Parts List
This manual contains the parts list of each individual product for the
DIN 3 Meter. Be sure to check the contents of the product BEFORE
installation. If any parts are missing or damaged, please repack the
unit and all of its contents and return to your dealer of purchase with
proof of purchase.
●DIN 3 Meter Product Code 409-A003
(Temperature x 2 : Pressure x 1)
Temperature Temperature
Main Unit ...１
Sensor ...２
Sensor
Harness ...２
1.5ｍ
Power Supply Double Sided Splice ...５
Harness ...１ Tape ...１
Plug Receptacle ...５ Female Sleeve ...５ Zip Tie ...７
■ ■ ■ ■ How to use the Plug How to use the Plug How to use the Plug How to use the Plug
③ Fold the
①Peel off the coating ② Cover with
wires
of the wires about a sleeve
[5mm]
Please move the sleeve to
Make
the caulked position when
caulking thrust
finished the caulking.
into the wires
■ ■ ■ ■ How to use the Splices How to use the Splices How to use the Splices How to use the Splices
①Remove 5mm of ② Strip 10mm ③ Wrap the two
wires together
the wire cover from the other
from the connection wire
connecting wire
* be sure to cover the connection with electrical tape
３ ３ ３ ３ Part Descriptions Part Descriptions
Part Descriptions Part Descriptions
Analog Indicators
Temperature Indicator Pressure Indicator
Analog 0～10×100kpa
Analog ３0～197.5℃
Digital 0～199.5℃ Digital 0～10×100kpa
Temperature Indicator
Analog ５0～197.5℃
Mounting Points – Bolt Holes
Digital 0～199.5℃
（M4 Bolt, up to 6mm insert）
to the
the instruction
not followed
126mm
24.5mm
171mm
！
CAUTION CAUTION CAUTION CAUTION
● Be sure to not touch the back of the DIN Meter where the Harness
Connection Connector opening is located as it may be warm in temperature
during and immediately after operation.
４ ４ ４ ４
Wiring Connection Diagram Wiring Connection Diagram Wiring Connection Diagram Wiring Connection Diagram
Engine Bay Car Interior
COM Harness
Temperature
Sensor
Harness
Temperature
Red Wire: Constant Power
Pressure
Sensor
Black Wire: Ground
Sensor
Harness
Pressure Sensor
５ ５ ５ ５ Installation Procedures Installation Procedures Installation Procedures Installation Procedures
Please be sure to install the Sensor Unit before sensor installation. Please be sure to install the Sensor Unit before sensor installation. Please be sure to install the Sensor Unit before sensor installation. Please be sure to install the Sensor Unit before sensor installation.
Temperature Sensor Installation Temperature Sensor Installation Temperature Sensor Installation Temperature Sensor Installation
Temperature Sensor Thread Pitch = 1/8 PT.
● Locate a point where temperature can be measured.
！
CAUTION CAUTION CAUTION CAUTION
● Be sure to use Teflon Tape or sealant to seal the 1/8 PT sensor and apply when
needed.
2.5ｍ
● Be sure to mount sensor unit and sensors away from electrical interference or
2.5ｍ noise (ex: Ignition Systems).
● Be sure to route the harness away from moving parts and HOT areas.
Pressure Pressure Sensor ● Be sure to drain and fill the oil and radiator fluid according to the vehicle owner's
Sensor ...１ Harness ...１
manual. For the radiator, once its filled with the appropriate coolant, make sure to
bleed the system.
● Be sure to check for any water or oil leaks to prevent sever engine damage.
● The 1/8 PT threaded portion is tapered. Do not overtighten, be sure to
Male Sleeve ...５ tighten by hand first then use a tool to torque down completely to
Plug ...５
prevent thread damage.
・・ Temperature Sensor
1/8 PT
manual・・
Be sure to apply TEFLON Tape, or sealant
to prevent leaking when necessary
Instruction Manual
(English) ...１
◆ Oil Drain Plug Installation
When installing the Temp Sensor onto the oil drain bolt location, be sure
Caulk the
④ Caulk securely
to use an optional sensor adapter and copper washer when required.
conductors by
these portions
Caulk the
coating
by these
the
Pressure Sensor Installation Pressure Sensor Installation Pressure Sensor Installation Pressure Sensor Installation
TemperatureThe Pressure Sensor Thread Pitch = 1/8 PT.
● Locate a point where pressure can be measured.
④ Securely fasten together
other connection wire
！
WARNING WARNING WARNING WARNING
● Do not use the pressure sensor on fuel systems with extremely high fuel pressure
engines or on diesel engines where fuel is more prone to leaking and can result in
Make the caulking
thrust into the wires
fire causing severe engine and vehicle damage.
Ｐ． Ｐ．１ １ １ １ Ｐ． Ｐ． Ｐ． Ｐ． Ｐ． Ｐ．3 3 3 3
Ｐ．２ ２ ２ ２ Ｐ． Ｐ． Ｐ． Ｐ． Ｐ． Ｐ． Ｐ．４ ４ ４ ４
◆ For Pressure ◆ For Pressure ◆ For Pressure ◆ For Pressure
Connect to Sensor Unit connector point
ＬＥＤ Indicators
labeled "PS1"
PEAK Switch
MODE Switch
RESET Switch
Digital Numerical Meter
7 7 7 7 How to Install Meter How to Install Meter How to Install Meter How to Install Meter
● Locate the mounting location for the DIN 3 Meter
● Be sure to mount in a location where wiring harnesses can
※Harness Connection Connector
reach the meter display unit.
Display Case Opening
！
Harness Connection Connector
WARNING WARNING WARNING WARNING
● Be sure to mount the meter in a location that does not interfere with normal
driving and can be easily adjusted. Failure to do so may result in serious injury
or even accidental death.
● Be sure to mount the meter in a location that does not interfere with vehicle
airbag systems.
Power Supply Wiring Harness Power Supply Wiring Harness
Power Supply Wiring Harness Power Supply Wiring Harness
● The DIN 3 Meter requires the connection of an Ignition Power,
Illumination Power, and a Ground.
※ Install both Ignition Power wires and Ground wires on the
same wire connection but separated by an inch.
● Connecting the wires can be done by using the included splices or by
using professional soldering equipment. Be sure that each wire has a
Red Wire: Ignition Power
Red Wire: Ignition Power
secure connection.
Power Supply
Green Wire: Illumination Power
Harness ● Please confirm that wiring connectors are securely connected, use
Black Wire: Ground
Black Wire: Ground
electrical tape when necessary to prevent connections from coming
loose.
POWER
！
CAUTION CAUTION CAUTION CAUTION
● Be sure to use Teflon Tape or sealant to seal the 1/8 PT sensor and apply when
needed.
● Be sure to mount sensor unit and sensors away from electrical interference or
noise (ex: Ignition Systems).
● Be sure to route the harness away from moving parts and HOT areas.
● Be sure to drain and fill the oil according to the vehicle owner's manual.
● Be sure to check for oil or fuel leaks to prevent severe engine damage.
● The 1/8 PT threaded portion is tapered. Do not over tighten, be
sure to tighten by hand first then use a tool to torque down
completely to prevent thread damage.
Point of Pressure Measurement
-Factory Oil Pressure Switch
-Oil filter relocation kit
-Fuel Rail (Fuel Delivery Pipe)
-Fuel Line (Delivery Side)
Pressure Sensor 1/8 PT
Be sure to use a sensor adapter if
the fitting is not 1/8 PT.
６ ６ ６ ６ Sensor Harness Connection Sensor Harness Connection Sensor Harness Connection Sensor Harness Connection
● ● ● ● Connect each sensor to its corresponding harness.
● Refer to the diagram and connect the sensor harness to the sensor unit.
● Be sure to securely tighten the sensor harness using zip ties and firmly
mount the sensor unit to the vehicle.
◆ For Water Temperature ◆ For Water Temperature ◆ For Water Temperature ◆ For Water Temperature
Connect to Sensor Unit connector point labeled "TP1"
◆ For Oil Temperature ◆ For Oil Temperature ◆ For Oil Temperature ◆ For Oil Temperature
Connect to Sensor Unit connector point labeled "TP2"
★ ★ ★ ★ For Temperature sensors, both "TP1" and "TP2" can be
used. Be sure to select the proper input as the meter
indicator ranges differ on the display unit.
★Temperature sensor harnesses are indicated by a "Red Wire
・Green Wire" and "Blue Wire ・Green Wire".
★In the case where the Temp. Sensor
Harness is too short, please use an
extension harness (3M), sold
separately.
！
CAUTION CAUTION CAUTION CAUTION
● Always remove paint and oil from any Grounding location to prevent faulty
connections.
● Do not use electro-taps during installation. Electro-taps may come loose after time
causing faulty connections. This may lead to product failure and vehicle damage.
● Be sure to route the harness away from moving parts and HOT areas. If in a HOT
PS1
area, be sure to wrap the harness with some type of insulation.
● Be sure to mount the meter away from electrical interference or noise (ex: Ignition
Pressure Sensor
Pressure Sensor
Systems).
Harness
COM Wiring Harness COM Wiring Harness COM Wiring Harness COM Wiring Harness
● Install the COM harness from the sensor unit in the engine bay to
the DIN 3 Meter inside the vehicle cabin.
● Please confirm that wiring connectors are securely connected, use
electrical tape when necessary to prevent connections from
coming loose.
！
CAUTION CAUTION CAUTION CAUTION
● Be sure to route the harness away from moving parts and HOT areas. If in a
HOT area, be sure to wrap the harness with some type of insulation.
● Be sure to mount the meter away from electrical interference or noise (ex: Ignition
Systems).
DIN 3 Meter Installation DIN 3 Meter Installation DIN 3 Meter Installation DIN 3 Meter Installation
● Be sure to mount the meter in a location that does not interfere
with normal driving and can be easily adjusted. Failure to do so
may result in serious injury or even accidental death.
● Use the Double-Sided Tape to securely mount. When using the
double-sided tape, be sure to wipe the mounting surface clean of
any dust, oil, and debris.
！
WARNING WARNING WARNING WARNING
● Be sure to mount the meter in a location that does not interfere with normal
Red Wire: Ignition Power
driving and can be easily adjusted. Failure to do so may result in serious injury or
Red Wire: Ignition Power
even accidental death.
Green Wire: Illumination Power
Black Wire: Ground ● Be sure to mount the meter in a location that does not interfere with vehicle
Black Wire: Ground
airbag systems.
Connect to sensor
harness
1/8 PT
Be sure to apply TEFLON Tape, or sealant
to prevent leaking when necessary
TP1 TP2
Temperature
Sensor
Temperature Sensor
Harness
COM 1
COM
Harness
COM
Vehicle Cabin Engine Bay