AMT AMT662 Assembly Instructions

U.S.S. ENTERPRISE NCC-1701-D
TM
DECAL & PAINT INSTRUCTIONS
HINT: For more details on
paint and decal placement,
refer to box art.
26 25
J
66 67
B G E
B
62 60 64 65
69
51
55
61
63
53
B
62
60
52
69
63 61 64 65
B
HINT: To seal decals, and for a more
finished look, apply a clear dullcoat spray
after paint and decals are completely dry.
KEY TO NUMBERING
000
First Layer Decal Application
000
Second Layer Decal Application
000
Opposite Side Decal Application
A
Paint Color (optional)
Special thanks to E. James Small for developing the aztec decals included in this kit.
For excellence in model building, visit his web site at
AMT is a registered trademark of Learning Curve Brands, Inc. used under license to Round 2, LLC. © 2010 Learning Curve Brands, Inc. All rights reserved.
®
TM, & © 2010 CBS Studios Inc. All rights reserved. STAR TREK and related marks are trademarks of CBS Studios Inc. © 2010 Paramount Pictures Corp. All rights reserved.
© 2010 Round 2, LLC South Bend, IN 46628 USA. Product and packaging designed in the USA. Made in China. All rights reserved.
A662-200
24 23
22 21
B
70 x4
28 27
50 x2
54
x2
B
42
32
40
38
44
36
71
30
J
29
37 35
41 39
31
KEY TO PAINT COLOR
A F
Light Gray Copper
B G
Medium Gray Yellow
C H
Black Pearl White
D I
White Light Blue
E J
Red Medium Blue
smallartworks.ca
33
34
GENERAL ASSEMBLY:
parts for ease of assembly. Care and patience must be exercised to achieve
optimal results. The kit has been designed to assemble via snap assembly.
GLUE ASSEMBLY:
recommended that the instructions be examined carefully before
applying cement. You will find this very helpful, as it will allow you to gain a
clear understanding of how the parts fit together in order to best plan painting
and final assembly. If doing a test fit, scraping the attachment pins with a knife
43
blade may be beneficial to separate parts before re-assembling with glue.
SUB-ASSEMBLIES:
B
sub-assemblies. This makes building the kit far more manageable. It is very
important to note that it can be extremely advantageous to apply paint and
decals to sub-assemblies before completing final assembly.
DECALS & PAINT
the large areas of aztec paneling decals are applied first, allowed to dry,
and a second set of smaller decals (primarily marking decals) are placed on
top. These decals are compatable with setting solution which can be applied to
conform around surface details. Paint is not required to produce satisfactory
results. However, some modelers prefer to add additional painted detail to their
kits. See the diagrams on this sheet for instructions regarding decal placement
and optional paint specs. For best results apply dull coat for final finish.
For more model building tips and techniques, visit the Workbench section of our
website at round2models.com/workbench
round2models.com
U.S.S. ENTERPRISE NCC-1701-D
ASSEMBLY INSTRUCTIONS
This highly-detailed kit features precision-tooled
If a modeler chooses to glue their model, it is
Note that this kit is intended to be built in
: This kit includes extensive water slide decals. Note that
AMT662
® ®
TM