Additional Information; Remote Control - LG LAS454B Simple Manual

2 TV Connection
a
Connect the sound bar to the TV using
Optical cable.
b
Set up [External Speaker (Optical)] on
your TV setting menu.
TV
Addtional Device Connection
a
Connect to the external device as follows.
(Set-top Box,
Player etc.)
TV
b Set the input source by pressing F on the
remote control or unit repeatedly.

Remote control

STANDARD/VOICE/CINEMA:
DRC ON/OFF: Make comfortable sound at Dolby Digital.
Adjusts the volume level of
WOOFER LEVEL +/-:
subwoofer.
AUTO POWER ON/OFF: Automatically turns on by an
input source.
Replacement of battery
Select sound effet.

Additional Information

Specification
Power
Refer to the main label.
requirements
Refer to the main label.
Power
Networked standby : 0.5 W
consumption
(If all network ports are
activated.)
Dimensions Approx.
(W x H x D) 950 mm x 71 mm x 47 mm
Net Weight Approx. 2.47 kg
Total amplifier 300 W
Design and specifications are subject to change without
notice.
How to disconnect the wireless network
connection or the wireless device
Set up the AUTO POWER ON/OFF function to off and
turn off the unit.
POWER: This unit operates on a mains supply of 200-
240V~, 50/60Hz.
Wiring: This unit is supplied with a BS 1363 approved
main plug. When replacing the fuse, always use of the
same rating approved to BS 1362. Never use this plug
with the fuse cover omitted. To obtain a replacement
fuse cover contact your dealer. If the type of plug
supplied is not suitable for the mains sockets in your
home, then the plug should be removed and a suitable
type fitted. Please refer to the wiring instructions below:
Warning: A mains plug removed from the mains lead
of this unit must be destroyed. A mains plug with bared
wires is hazardous if inserted in a mains socket. Do not
connect either wire to the earth pin, marked with the
letter E or with the earth symbol
or green and yellow. If any other plug is fitted, use same
rating of fuse in the plug.
Important: The wires in this mains lead are coloured in
accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours
of the wires in the mains lead of this unit may not
correspond with the coloured marking identifying the
terminals in your plug, proceed as follows: The wire which
is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black. The
wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured
red.
or coloured green