Goji GVREP18C Instruction Manual page 2

General Operation
1. Ensure that the tube clear plastic stickers
are removed from the inside of the
optical lens.
2. Open the Mobile Compartment, and
place your mobile device into the unit.
• Remove case from your mobile device if any.
• Support mobile device up to 165 x 84 x 10.5 mm.
3. Close the Mobile Compartment and
make sure it is locked rmly.
4. You may charge your mobile device
with charging cable or connect your
earphones to the earphones socket via
the Hole.
5. Tie the strap around your head, adjust its
length to t tightly but comfortably.
6. Place the device onto your head, adjust
the lens for the best images.
7. Slide the Magnetic Control to control
the VR app.
<84 mm <165 mm
• Magnetic Control supports most of the apps with this feature.
• VR apps can be found from iOS/Android device's app store under
Entertainment category.
Using Earphones
1. Connect left and right speakers
with a 3.5mm audio cable.
2. Use the other 3.5mm audio
cable to connect the left
speaker's AUX IN socket with
your mobile device's earphones
socket.
3. Hook the speakers onto the
strap.
Hints and Tips
Problem
When I slide the
Magnetic Control,
there is no
response from my
mobile device.
My mobile device
responds to the
Magnetic Control,
but the VR app
does not.
AUX IN socket
Earphones socket
Solution
• Not all mobile devices have Gyroscope Sensors
that can detect the Magnetic Control. Please
contact your mobile device supplier.
• Ensure your mobile device is positioned at the
correct direction next to the Magnetic Control.
• Some VR apps do not need the Magnetic
Control to function.
• Some VR apps do not need the Magnetic
Control to function. We recommend you to
install the VR app by scanning the QR code.
After scanning and installing the VR app then
conduct a test whether or not the VR app will
respond to the Magnetic Control.
DSG Retail Ltd. (co. no. 504877)
1 Portal Way, London, W3 6RS, UK
IB-GVREP18C-170801V1