sunjoe GTS4000E Operator's Manual

Lawn + garden multi-tool system

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

A Division of Snow Joe

, LLC

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety WARNINGS!

You and any other operator of this power tool must read,

understand, and follow these instructions in their entirety.

Failure to follow these instructions may result in ELECTRIC

SHOCK, FIRE, and/or serious PERSONAL INJURY.

Notice the personal safety alert symbol

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

WARNING!

This unit can be dangerous! Careless or

improper use can cause serious injury.

WARNING!

The rotating blades can cut you. Keep

hands and feet away from the blades and the cutting area.

Before using the power tool, familiarize yourself with the

controls, especially how to stop the power tool in an

emergency. The only individuals who should use the power

tool are those who thoroughly understand these instructions

and know how to properly operate the unit. Children should

never be allowed access to the power tool.

Retain this manual for future reference and reread it at the start

of each season.

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents.

2. Replacement parts – When servicing this unit, use only

identical replacement parts. Replace or repair damaged

cords immediately.

3. Keep children, bystanders, and pets away – All

spectators, including pets, should be kept a safe distance

away from the work area.

4. Know your product – Know how to start and stop the

machine. Be thoroughly familiar with the controls. Ensure

the controls (start/stop) function properly before using.

, LLC

LAWN + GARDEN MULTI-TOOL SYSTEM

HEDGE TRIMMER | POLE HEDGE TRIMMER | GRASS TRIMMER | GARDEN TILLER

Model GTS4000E

used in this

5. Use the right tool – Do not use this power tool for any job

except that for which it was intended.

6. Dress properly – Do not wear loose clothing or jewelry as

such articles can become caught in moving parts. Wear

a protective covering to contain long hair. Wearing rubber

gloves and substantial non-slip footwear is recommended

when working outdoors.

7. Extension cords – To prevent electric shock, use only

with an extension cord suitable for outdoor use.

8. Avoid accidental starting – Do not carry the power tool

with your finger on the switch. Make sure the switch is off

before plugging in or unplugging the unit.

CAUTION!

Moving parts will continue to run for several

seconds after turning off the machine.

9. Do not abuse the cord – Never carry the power tool

by the cord or yank the cord to disconnect it from the

receptacle. Keep the cord away from heat, oil, and sharp

edges.

10. Moving parts – Keep hands and feet away from moving

parts. Keep guards in place and in proper working order.

11. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

12. Do not overreach – Keep proper footing and balance at

all times.

13. Use safety glasses – Also use safety footwear, snug-

fitting clothing, protective gloves, hearing, and head

protection.

14. Disconnect the tool – Disconnect the power tool from

the power supply when it is not in use, before servicing

it, when changing accessories, and when performing any

other maintenance task.

15. Store idle tool indoors – When not in use, the power tool

should be stored indoors in a dry and high or locked-up

place out of the reach of children.

16. Maintain the power tool with care – Keep the cutting

edges sharp and clean for optimal performance and

to reduce the risk of injury. Inspect the extension cord

periodically and immediately replace it if damaged. Keep

the handles dry, clean, and free from oil and grease.

Follow the additional recommendations described in the

maintenance section of this manual.

17. Avoid dangerous environments – Do not use the power

tool in rain or in damp or wet locations. Do not operate

the power tool in gaseous or explosive atmospheres or

use the power tool near flammable or combustible liquids.

Motors in these tools normally spark, and the sparks

might ignite fumes.

SAVE THESE INSTRUCTIONS

Form No. SJ-GTS4000E-880E-M

OPERATOR'S MANUAL

Table of Contents

Summary of Contents for sunjoe GTS4000E

Page 1: Safety Instructions
LAWN + GARDEN MULTI-TOOL SYSTEM HEDGE TRIMMER | POLE HEDGE TRIMMER | GRASS TRIMMER | GARDEN TILLER Model GTS4000E Form No. SJ-GTS4000E-880E-M OPERATOR’S MANUAL A Division of Snow Joe , LLC ® IMPORTANT! 5. Use the right tool – Do not use this power tool for any job except that for which it was intended.
Page 2 18. Stay alert – Watch what you are doing. Use common 11. Do not use the hedge trimmer if the switch does not turn it sense. Do not operate the power tool when you are on and off. Any power tool that cannot be controlled with tired or under the influence of drugs, alcohol, or other the switch is dangerous and must be repaired.
Page 3 13. Never use the grass trimmer when it is raining or when 16. Never operate the garden tiller without proper guard, excessively moist and humid conditions are present. Do not plates, or other safety protective devices in place. cut damp grass or leave the tool outside overnight. 17.
Page 4 Electric Safety 4. To prevent the appliance cord from disconnecting from the extension cord during operation, use the onboard extension cord restraint hook and/or make a knot with the 1. Ground fault circuit interrupter (GFCI) protection should two cords as shown in Table 1. be provided on the circuit(s) or outlet(s) to be used for this power tool.
Page 5 Double-Insulated Appliances In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double- insulated appliance requires extreme care and knowledge of the system, and should be performed only by qualified service personnel at an authorized Snow Joe + Sun Joe...
Page 6: Safety Symbols
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S Wear eye protection, breathing MANUAL(S) –...
Page 7: Technical Data
Know Your Lawn + Garden Multi-Tool System Read the owner’s manual and safety instructions carefully before operating the hedge trimmer, pole hedge trimmer, grass trimmer and garden tiller. Compare the illustration below to the power tool in order to become familiar with the location of the various controls and adjustments.
Page 8: Fig. 1
Unpacking Fitting the Hedge Trimmer 1. Insert the rear handle directly into the hedge trimmer Carton Contents cutting head. When fully inserted, press down the quick- release button. Make sure the button snaps in firmly and • Hedge trimmer cutting head with blade cover securely, locking the parts together (Fig.
Page 9 4. Press down the quick-release button. Ensure the release 3. Adjust the length of the strap to attain a comfortable button snaps firmly into position to lock the handle working position. securely (Fig. 5). WARNING! The buckle is provided with a means of quick release which can be accomplished by simply squeezing Fig.
Page 10 To start the hedge trimmer: 3. To turn the tool OFF, release the trigger switch (Fig. 11). NOTE: Do not press the trigger switch until you are ready 1. Hold the hedge trimmer firmly with both hands. Your right to make a cut. hand is slightly bent and is holding the rear handle, and your left hand is straight and is holding the front handle.
Page 11: Cutting Procedures
3. Extend the telescoping pole to a comfortable height • Wear gloves when trimming thorny or prickly growth. When trimming new growth, use a wide sweeping action, so that (Fig. 14). the stems are fed directly into the cutting blade. Older NOTE: Push poles toward each other to shorten the pole growth will have thicker stems and will be trimmed easiest or pull them away from each other to lengthen the pole.
Page 12 5. To use pole hedge trimmer for trimming the bottoms and sides of hedges and shrubs, hold the pole trimmer at the Fig. 15 5º – 10º position shown below (Fig. 18). Fig. 18 3. To perform a vertical cut, start trimming at the bottom and sweep up for even cutting.
Page 13 Care + Maintenance Sharpening the Blades The blade must be re-sharpened if cutting performance and ATTENTION! behavior begin to deteriorate (i.e. if blades frequently snag on Before performing any cleaning or branches). maintenance, disconnect the unit from the power supply. Never touch the moving blades.
Page 14 Troubleshooting Most difficulties are easy to fix. Consult the troubleshooting table for common problems and their solutions. If you continue to experience problems or need repairs beyond these minor adjustments, please call 1-866-SNOWJOE (1-866-766-9563) for assistance. Troubleshooting Table Problem Possible Solution Possible Cause •...
Page 15 2. Firmly press the safety guard into place and secure it to Grass Trimmer the trimmer head with the two screws provided (Figs. 23). NOTE: Never use the tool unless the safety guard is properly Assembly fitted. Fig. 23 WARNING! Do not connect to power supply until assembly is complete.
Page 16 2. Insert the rear handle into the end of the telescoping pole 3. Extend the telescoping pole to a comfortable height (Fig. 26). (Fig. 28). 3. Press down the quick release button. Ensure the release button snaps firmly into position to lock the handle Fig.
Page 17 Starting the Grass Trimmer WARNING! The buckle is provided with a means of quick release which can be accomplished by simply squeezing Before you start the grass trimmer, make sure the trimmer is the sides of the buckle (Fig. 30). not contacting any object.
Page 18 Edging WARNING! Remove stones, loose pieces of wood, and other objects from the cutting area. The string continues to 1. To convert for maintenance edging, turn OFF and unplug rotate for a few seconds after switching off the trimmer. Let the the tool.
Page 19 Maintenance 5. Use the edge of the guard as a guide when cutting near fences and walls (Fig. 39). WARNING! Make sure to unplug your electric grass Fig. 39 trimmer before inspecting its parts. WARNING! Always wear protective gloves during maintenance tasks.
Page 20: Spool Line
Winding the Line Fig. 42 NOTE: A dual-line factory wound spool (model GTS4000E-RS- 6PK) is available for easy spool replacement on the GTS4000E Slot electric grass trimmer. Visit snowjoe.com to purchase this accessory online. Should you wish to wind the line yourself, the instructions are provided below.
Page 21: Table Of Contents
5. Fill the second half of the spool by repeating step 3. Insert Fig. 46 the end of the second line in the opposite side of the spool (Figs. 49 - 51), and begin winding. Fig. 49 Spool line Fig. 47 Fig.
Page 22 Visit snowjoe.com to purchase the pre-wound spool (model • Clean the grass trimmer thoroughly before storing. GTS4000E-RS-6PK) for this electric grass trimmer. • Store the grass trimmer in a stable and safe position out of IMPORTANT: Keep all areas of the cutting head and cutting the reach of children.
Page 23: Fig. 52
2. Insert the rear handle into the end of the telescoping Garden Tiller handle (Fig. 54). 3. Press down on the quick release button. Ensure the release button snaps firmly into position to lock the handle Assembly securely. WARNING! Do not connect to power supply until Fig.
Page 24: Fig. 56
Operation Height Adjustment The telescoping pole can be extended or shortened for ease NOTE: Before using this garden tiller, make sure that the of use. power source you will use complies with the specifications 1. Disconnect the garden tiller from the power supply. detailed in this manual.
Page 25 Starting the Garden Tiller NOTE: Use the tiller for breaking sod, preparing seed beds, and for tilling gardens and flower beds. The unit can also dig Before you start the garden tiller, make sure the tiller is not small holes for planting sapling or transplanting potted plants. contacting any object.
Page 26 Fig. 65 Fig. 61 IMPORTANT: The blades must be set in the correct turning Fig. 66 direction. Note the position of the original blades, and replace them in the exact same direction. Fig. 62 5. Only use blades that are produced by the manufacturer. Cleaning, Maintenance + Fig.
Page 27 Check that safety features (labels, guards) are in place. Check that nuts, bolts and screws are tight. Service + Support If your Sun Joe GTS4000E lawn + garden multi-tool system ® requires service or maintenance, please call the Snow Joe ®...
Page 28: Optional Accessories
+ garden mulit-tool ® system. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage. Accessories Item Model Dual-line pre-wound spool (6-Pack) GTS4000E-RS-6PK Snow Joe + Sun Joe universal wall bracket ® ® SJWB...
Page 29 NOTES...
Page 30 NOTES...
Page 31 SNOW JOE + SUN JOE CUSTOMER PROMISE ® ® ABOVE ALL ELSE, Snow Joe + Sun Joe are dedicated to you, our customer. We strive to make your experience as pleasant ® ® as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us.
Page 32 snowjoe.com WARNING! This product or its power cord contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information go to www.P65Warnings.ca.gov. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known [to the State of California] to cause cancer, birth defects, or other reproductive harm.

sunjoe GTS4000E Operator's Manual

Quick Links

Safety Instructions

General Safety WARNINGS!

Related Manuals for sunjoe GTS4000E

Summary of Contents for sunjoe GTS4000E

Table of Contents