RCA RCU900 User Manual page 8

RCU900_IB_revC.qxp 12/3/02
Library Code Entry (continued)
To enter a code directly from the Code List, follow these steps:
1. Manually turn on the device to be
controlled (TV, VCR, DVD, etc.).
2. Press and hold the SETUP key on
the rubber keypad until the LED
indicator light remains on and the
touchscreen shows the Main Setup
Screen. This process takes
approximately 2-3 seconds.
3. Release the SETUP key.
4. Press and release the LCD CODE key.
The LED indicator light blinks
once to indicate acceptance of
the keypress.
5. The touchscreen now shows the
Device Setup Screen. Press and
release the device key on the rubber
keypad for the device whose code
you want to enter (TV, VCR,
SAT/CBL, etc.). The LED indicator
light blinks once to indicate
acceptance of the keypress.
6. For AUX1 or AUX2, press and release
the AUX device key, followed by
the desired device key to be
programmed under AUX (TV, VCR,
SAT/CBL, etc.).
7. The touchscreen now shows the
Code Setup Screen. Find the
three-digit code for your device
brand from the Code List at the back
of the manual. If your brand has
more than one code listed, begin with
the first code. Enter the three-digit
code from the Code List. When a
valid code from the list is entered, the
LED indicator light blinks after the
last digit is entered. For an invalid
code, the LED indicator light flashes
rapidly and beeps for two seconds
before going off. In both cases, the
touchscreen returns to the Main
Setup Screen.
8. Before the code can be tested on the
chosen device, you must exit back
to normal operation by pressing
the CLEAR key on the Main
Setup Screen.
9. With the device on, aim the RCU900
at the device and press the ON•OFF
or the CH + key on the rubber
keypad. If you have entered the
correct number for your device, it
will respond to the ON•OFF or CH +
key. If the device responds, no
further programming is required.
10. If your device does not respond, try
the next code in the list for your
brand by repeating the procedure
starting at step 2. If no other codes
exist for your brand, try the Code
Search or Code Autosearch methods.
8
9:45 Page 8