Installation Intellijel Eurorack modules are designed to be used with a Eurorack-compatible case and power supply. Before Your Start Before installing a new module in your case you must ensure your case’s power supply has sufficient available capacity to power the module: ...
Page 3
Eurorack case. Ensure the red stripe on the cable lines up with the -12V pins on the bus board. On Intellijel power supplies the pins are labelled with the words “-12V” and a thick white stripe. ...
For this you need a logic inverter, such as the Intellijel Plog. You may, however, feed an output from a Quad Inverter into a Triatt or Quadratt to offset the voltage such that gate inversion occurs. ...