Preparation; Status Display Of Disc - RCA 24F502TDV User Manual

The following pages describe the
setup/operation in DVD mode.
NOTE:
If the TV/VCR/DVD does not operate
properly: Static electricity, etc., may
affect the player's operation. Disconnect
the AC power cord once, then connect it
again.
5V40101C [E] P42-45
Preparation / Status display of disc

Preparation

Before DVD/CD operation, please make preparations as follows.
1
Insert the AC cord plug into a standard 120V 60Hz polarized
AC outlet.
• If the AC cord plug is plugged in for the first time, wait for
about 5 seconds before pressing POWER.
NOTE: When connecting to other equipment, unplug the TV/
VCR/DVD from the AC outlet.
2
Press POWER on the TV/VCR/DVD or on the remote control
to turn on the TV/VCR/DVD. The Power indicator will light.
• Every time you press POWER, the TV/DVD starts from TV
mode.
• When using an amplifier, switch on the amplifier.
3
Press DVD to select DVD mode.
The DVD startup screen will
appear on the screen.

Status display of disc

Press DISPLAY/CALL. The status display of the disc will appear
on the screen in order like the figure below.
DVD
Play status
Title number
Subtitle language
Audio CD
Disc operation
Track number
• When you play a CD disc, the status display will appear and
remain on the screen.
43
No Disc
Title elapsed playing time
00:03:13 01:30:32
Chapter No
1/2 1/2 00:03:13 01:30:32
T C
Type of audio
1/1 Eng 1/2 Fra D 1/1
Audio language
Display Off
Track elapsed playing time
34:56 71:33
11/99
T
15`03`06, 11:01
Title total time
Camera angle
Track total time
43