Universal Remote Buttons (Crk76Tk1) - RCA J20542 User Manual

Using the Remote Control

Universal Remote Buttons (CRK76TK1)

VCR1 Puts the remote in VCR mode. If
you set up Auto Tuning, pressing VCR1
tunes the TV to the correct channel.
VCR2 Puts the remote in VCR mode to control
a second VCR. If you set up Auto Tuning, pressing
VCR2 tunes the TV to the correct channel.
DVD Puts the remote in DVD mode. If you set up
Auto Tuning, pressing DVD tunes the TV to the
correct channel.
MUTE Lowers the volume to its minimum level.
Press again to restore volume.
VOL (up and down) buttons Decrease or
increase the TV's volume, unless Volume Hold
is enabled. Go to Chapter 1 for more
information on Volume Hold.
CC Displays the Closed-Caption Display.
GUIDE Displays the Channel Guide.
Arrow buttons (up, down, left, right) Use to
move through the on-screen menus. Also moves
PIP window to different areas on the screen.
MENU Displays the TV's Main menu.
0-9 (Number buttons) Use to enter channel
numbers and time settings. To enter a two-digit
channel, press the two digits. To enter a three-
digit channel, press and hold the first digit for
two seconds until two dashes appear to the
right of the number, then add the second two.
WHO•INPUT In TV mode, press to toggle
through the available Video Input channels. In
SAT mode, press to select available channel lists.
REVERSE Press REVERSE to go backwards on a
videotape or disc.
RECORD If the remote is in VCR mode, press
to start recording.
12
ON•OFF Turns the TV on and off. When the remote is
in another mode and the remote is programmed to
operate that component, press ON•OFF to turn that
component on and off.
VCR1
DVD
MUTE
GUIDE
MENU
1
4
7
WHO INPUT
REVERSE
RECORD
u n i v e r s a l
PIP, SWAP and CH CTRL do not have a function
for these models
Graphics contained within this publication are for representation only.
ON OFF
TV1
VCR2 TV2 SATCABLE
SKIP
GO BACK
CC
INFO
OK
CLEAR
3
2
5 6
8 9
ANTENNA
0
PLAY FORWARD
STOP PAUSE
PIP SWAP
CH CTRL RESET
L.E.D. Lights when you are programming the
remote.
TV1 Turns on the TV and puts the remote in TV1
mode. Go to Chapter 1 for more information on
TV1 mode.
TV2 Turns on the TV and puts the remote in TV2
mode. Go to Chapter 1 for more information on
TV2 mode.
SAT•CABLE Puts the remote in SAT•CABLE
mode. If you set up Auto Tuning, pressing
SAT•CABLE tunes the TV to the correct channel.
SKIP If you press SKIP before you change the
channel, the TV waits 30 seconds and then goes
back to the original channel. Each subsequent
press adds 30 seconds to the skip time. Press
CLEAR to cancel.
CH (up and down) buttons Scan up or down
through the current channel list.
GO BACK Tunes to the last selected channel or
video input.
SYSTEM This button allows the remote to
change between TV1 and TV2 mode. It also
allows access to system-defined functionality,
when available. See the description later in this
chapter for more details.
INFO Displays channel information.
OK Press OK to select a menu item that is
highlighted.
CLEAR Removes any menu or display from the
screen and returns you to TV viewing.
ANTENNA Functions as TV/VCR button in VCR
mode and TV/receiver button in SAT•CABLE
mode.
FORWARD Press to advance a videotape or disc.
PLAY Plays a videotape or disc.
PAUSE Press to pause playback.
STOP Stops playing a videotape or disc.
RESET Returns the picture to the original
settings and displays the Picture Presets choice
list.
Chapter 2