Advertisement
CASSETTE OPERATION
Commands
Here are the commands that will activate your cassette drive unit.
Simply type the desire command and press <RETURN>. In the list of
commands below, NAME stands for the name that you, the user, assigns
to your program. You should select a name that will distinguish that
program from other programs (or data files) on the same tape. The name
should have a meaning to you. PROG1, PROG2, etc., are not good
choices because they are not distinctive. A program name can be no more
than 16 characters long.
SAVE"NAME"
will SAVE a program by storing it on the cassette unit.
Example: SAVE"TEST"
will SAVE the program TEST on to the cassette unit.
NOTE:
Simply typing SAVE will store the program without a name
on the cassette.
LOAD"NAME"
will LOAD the program NAME from tape. All other programs on the same
tape will be ignored.
Example: LOAD"TEST"
will LOAD the program TEST from the cassette.
If load is typed, then the first program found on the cassette will be
LOADed.
VERIFY"NAME"
will VERIFY that the program which has been SAVEd has been stored
correctly.
Advertisement
