Do you have a question about the G-FTB-51030A and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Hiland G-FTB-51030A
Page 1
OWNER’S MANUAL OUTDOOR FIREPIT MODEL # G-FTB -51030A Precaution! The Powder Coating paint process has become the most common widely used application in the outdoor furniture category. Unfortunately powder coating is extremely sensitive to Humidity and Moisture. A simple process to protect your furniture, especially flat surfaces is to apply a simple coat of good quality car wax prior to using.
Page 2
TABLE OF CONTENTS TABLE OF CONTENTS Table of Contents ..............1 • • Warnings and Cautions…………………………...... 2-4 • • • Tools and Parts ……………………………………..…………...5-7 • Tools and Parts ……………………………………..…………...5-7 • Assembly………………………………………………………… 8-10 • Assembly………………………………………………………… 8-10 • Lighting Operation………………………………….………..….11-13 • Lighting Operation………………………………….………..….11-13 •...
Page 3
WARNINGS AND CAUTIONS WARNINGS AND CAUTIONS Read the instruction before use. This appliance must be installed in accordance with such Read the instruction before use. This appliance must be installed in accordance with such regulations as are enforced. CAUTION CAUTION WARNING WARNING Installer: Leave the manual with...
Page 4
Warnings Warnings You must provide propane gas and propane cylinder. Use a standard 20 lb. propane You must provide propane gas and propane cylinder. Use a standard 20 lb. propane cylinder only. Use this heater only with a propane vapor withdrawal supply system. See Chapter 5 of the Standard for Storage and Handling of Liquefied Petroleum Gas, ANSI/NFPA 58.
Page 5
Warnings Warnings NOTE: PLEASE READ THE FOLLOWING SAFETY RULES NOTE: PLEASE READ THE FOLLOWING SAFETY RULES WARNING: WARNING: The unit is not for use with solid fuel. Any guard or other protective device removed for servicing the heater must be removed for servicing the heater must be The installation must conform with local replaced prior to operating the heater.
Page 7
Part List Part List Handle Cover Bolt Washer Glass(8kgs) Desktop Assembly Tank Plates Tank Door Back Leg L Back Leg R Front Leg L Front Leg R Cylinder Bracket Assembly...
Page 9
Assembly Instructions Assembly Instructions Step 1: Step 1: Connect the Legs to Desktop Assembly ( E ) by using four M6 X 12 bolts(AA). using four M6 X 12 bolts(AA). Note: Please don’t tighten the bolts at this time. Note: Please don’t tighten the bolts at this time. Step 2: Connect the Tank plates (F) to the Legs by using twelve M6 X 20 bolts(BB).
Page 10
Assembly Instructions Assembly Instructions Step 4: Step 4: Connect the Tank Door (G) to the Front Leg( J ) by Connect the Tank Door (G) to the Front Leg( J ) by hit the hinge. Step 5: Place the Glass ( D ) into the fire bowl. Note: Ensure no Glass is placed on the ignition portion the burner.
Page 11
Assembly Instructions Assembly Instructions Step 6: Step 6: Put the cylinder into the Cylinder Bracket (L), and Put the cylinder into the Cylinder Bracket (L), and secure the cylinder by tighten the screw in the Cylinder Bracket. Then connect the hose and Cylinder Bracket.
Page 12
OPERATION OPERATION WARNING: Never use this appliance for other than the intended use. Do not use this WARNING: Never use this appliance for other than the intended use. Do not use this appliance to prepare food. Initial Lighting: When lit for the first time, the appliance emits a slight odor. This is normal temporary condition caused by the “burn –in”...
Page 13
OPERATION OPERATION Leak Testing Operation Leak Testing Operation WARNING: A leak test must be performed annually, or if a part of the gas system is WARNING: A leak test must be performed annually, or if a part of the gas system is replaced.
Page 14
OPERATION OPERATION Lighting instructions WARNING WARNING FOR YOUR SAFETY: FOR YOUR SAFETY: Press and hold electronic igniter Press and hold electronic igniter Keep face and body away from Keep face and body away from button. button. burner area when lighting. burner area when lighting.
Page 15
MAINTENANCE AND STORAGE MAINTENANCE AND STORAGE CLEANING AND MAINTENANCE CLEANING AND MAINTENANCE To enjoy years of outstanding performance from your heater , make sure you perform To enjoy years of outstanding performance from your heater , make sure you perform the following maintenance activities on a regular basis: •...
Page 16
MAINTENANCE AND STORAGE MAINTENANCE AND STORAGE STORAGE: STORAGE: Between uses: Between uses: • Turn the control knob to “OFF” position. • Turn the control knob to “OFF” position. • Disconnect LP source. • Disconnect LP source. • Store heater upright in an area sheltered from direct contact with inclement weather (such as rain, sleet, hail, snow, dust and debris).
Page 17
TROUBLE SHOOTING TROUBLE SHOOTING PROBLEM PROBABLE CAUSE SOLUTION Low heat / Low flame Low heat / Low flame For propane- improper lighting For propane- improper lighting Ensure lighting procedure is followed carefully. The Ensure lighting procedure is followed carefully. The when valve turned to procedure.
Page 18
ONE-YEAR LIMITED WARRANTY CUSTOMERS IN USA Do not return this product to the store where you purchased it. Please call 1-888-775-1330 for assistance. CUSTOMERS IN CANADA Only return this product to the store if it was purchased within 90 days. If you have problems after 90 days of purchase, please CALL 1-888-775-1330.
Need help?
Do you have a question about the G-FTB-51030A and is the answer not in the manual?
Questions and answers