Sirius 830 Installation Manual
3. Prerequisites
This chapter describes the electrical and space requirements for the Sirius system.
3.1 Size Requirements
Make sure that sufficient space is available for the Sirius 830. For ventilation purposes, there
must be an additional 50 mm (2 inch) gap on the left and right sides.
The full height of the Sirius 830 is 668 mm (26.3 inches). Allow an additional 200 mm
(8 inches) behind the unit for power, control and signal cables.
3.1.1 Sirius 830 Dimensions
Issue 2 Rev 2
Dimensions are of full size system (without the power supply shelves)
Dimensions are in millimeters (inches).
20.77
527.5
22.61
574.4
Fig 2.
Sirius 830 Frame Dimensions
www.s-a-m.com
Page 13
17.60
447
18.94
481
6.82
173.3
Prerequisites
© 2016 SAM