Advertisement
I N S T R U C T I O N S
F O R
Your Rado 'Multifunction' is not
only an exceptional piece of jewel-
lery with an absolutely uncompro-
mising avant-garde design; it also
offers seven useful additional func-
tions, which can be easily accessed
via the crown.
U S E
Function selection
Leave crown in normal position
and turn.
Function adjustment
Pull crown out and turn.
Switching function on or off
Press crown briefly.
Setting to zero
Press crown (at least 3 sec.)
Advertisement
Related Manuals for Rado Ceramica Multifunction
Summary of Contents for Rado Ceramica Multifunction
- Page 1 Function selection Leave crown in normal position F O R U S E and turn. Your Rado ‘Multifunction’ is not only an exceptional piece of jewel- lery with an absolutely uncompro- mising avant-garde design; it also offers seven useful additional func-...
- Page 2 1. Setting the digital time still correct. If not, set one minute display: hours, minutes, back or forward. seconds 24-hour display / A.M.-P.M. dis- Select Function 1 (digital time dis- play: see Function 5 (T2). play) 1.1 Synchronisation of analogue a) Hours and minutes: and digital displays Pull the crown out.
- Page 3 Turning the crown quickly alters 3. Adjusting the the month, turning slowly alters day-of-the-week display the date. Select Function 3 (day and date Push the crown back in. The display) and pull the crown out. month display disappears, the sec- The day display flashes and instead onds display is visible again.
- Page 4 When the set hours/minutes have 24-hour display or 2i12 hours run out, the watch gives an acous- display tic signal. The watch can display 24-hour To switch off the signal: briefly clock time or 2i12 hours (A.M.- press the crown. P.M.).
- Page 5 display alternates between the Note: hours display and the minutes, sec- The alarm time can be set in the onds and hundredths of a second 2i12 hours (A.M.-P.M.) or the display. 24-hour mode. This should be While the stopwatch is running, taken into account when setting other functions can be selected the alarm time (see Function 5).
- Page 6 Battery Your Rado watch will draw your attention to the battery having run low by flashing the digital display. A low battery must be changed by a Rado concessionary as soon as possible. Please ask in the same time for a waterproof test. Ap- proximate running life: 2 ⁄...