Advertisement
Ethernet RJ45 connector:
The RJ45 connector features 2 LEDs: Green and Yellow.
The yellow LED lights when a 1 Gigbit Ethernet connection is established. Please note: the card will
connect only to 1000Base-T (Gigabit) Ethernet equipment.
The green LED lights when connection is achieved, and blinks when there is Ethernet activity (packets
are being sent and received, to and from the card).
Net LED:
A network LED is located at the back of the console, on the front panel of the card.
The LED functions as follows:
Condition
Firmware update
Device is up, but SoundGrid network is not
found
SoundGrid network found
Device ID mode
Hardware error state
LED color
Yellow
Red, blinking
Blue
Revolving colors
White
13
Advertisement
