Replacing Of Cast Heater - Panasonic SR-DE183 Service Manual

SR-DE103, 183 / SR-MS103, 183

10. REPLACING OF CAST HEATER

1. Remove the power socket (comp.) and body
• Remove the power socket and body in referring to replacing of P.C.B. base (comp.)
2. Remove the base of sensor
• Tear off the retaining tapes (2 places) on the wiring of the pan sensor.
• Remove the connections (2 places) between pan sensor and P.C.B.
• Remove the wiring (1 place) connected between pan sensor and cast heater.
• Remove the connection (1 place) between cast heater and P.C.B.
• Remove the grounding wire.
• Remove the connections (3 places) on base of sensor.
• Take out the base of sensor.
3.
Remove the cast heater
• Remove the retaining screw of cast heater (3 pieces).
• Take out the cast heater from protection frame.
4.
Reassembly
• Please reassemble the cast heater in reverse to disassembly.
Note :
• When reassembling, make sure to attach the fire-retardant tapes as what they are before removing.
- 17 -