Tripp Lite S3M30KX Owner's Manual page 30

4. Operation
Battery Mode
(continued)
Bypass Mode Description
LCD Panel
Battery Test Description
LCD Panel
When input voltage is within acceptable range and bypass is enabled, turn off the UPS and it will enter
Bypass Mode. The alarm will beep every two minutes.
When the UPS is in AC Mode or CVCF Mode, press the "Test" button for more than 0.5 seconds. The
UPS will beep once. The line between I/P and inverter icons will blink to remind users this operation is
used to check the battery status.
30