Advertisement
Quick Links
Contents
1. Before using
2. Name of parts
3. Function of control panel
4. Operation
5. Characteristics
6. Specification
7. Maintenance
8. Trouble shooting
1. Before using
This flash is a very precise photographic equipment therefore don't forget to read this operation manual
very carefully before using
1. Please read manual instruction before using it.
2. Input voltage should be checked before use.
3. Don't move or shock when power on. Coil of modeling lamp might be cut off in case of moving with
lamp on.
4. Connect to the properly functioning and grounded 3-pin receptacles only.
5. Attach or disattach reflector, snoot, or other accessories after halogen lamp turned off and cooled off.
6. Don't keep halogen lamp lighting for a long time when it is over 500W/s because
using snoot can overheat highly.(It normally heats up to 200 ℃ when a snoot is being used)
7. Use softbox made of noninflammable materials.
8. Be careful of electric shock when using this equipment in humid places.
9. Keep this equipment where children can not be reached
www.alb.co.kr
F-300 / F-600 / F-900 / F-1200
2. Parts
1
13
12
INDOOR USE ONLY
14
15
19
1
Protective cap
2
Flash tube
Glass dome
3
Ceramic base
4
5
Flash tube lug
Flash tube plate
6
Modeling lamp
7
Locking lever
8
1
2
2
3
4
5
6
7
8
9 10
11
21
22
18
17
16
20
Flash tube holder
9
17
Modeing lamp socket
10
18
Control panel
11
19
Modeling lamp volume slider
12
20
Photo cell
13
21
Modeling lamp fuse
14
22
Synchro socket
15
23
16
Fuse holder & Fuse
24
F-600
23
24
Power socket
Power switch
Stand adaptor
Holes for umbrella fixing
Stand adaptor for fixing bolt
Flash angle control bolt
Power cord
Synchro cord
Advertisement
Summary of Contents for Fusion F-300
- Page 1 2. Parts www.alb.co.kr F-300 / F-600 / F-900 / F-1200 9 10 F-600 Contents 1. Before using 2. Name of parts 3. Function of control panel 4. Operation 5. Characteristics 6. Specification INDOOR USE ONLY 7. Maintenance 8. Trouble shooting 1.
- Page 2 It will also serve to dump excess power. The red light indicator is on when charging is finished and off while it is charging. 9. When using an umbrella with your Fusion first mount a standard reflector model ALRD114 then 6. O.H : This indicator turns on and starts beeping when circuit boards are over heated.
- Page 3 6. Maintenance 5. Specification 1. How to replace a flash tube or halogen lamp. MODEL ① ② ③ ④ F-300 F-600 F-900 F-1200 SUBJECT Power range Joule/Ws 5~300Ws 5~600Ws 5~900Ws 5~1200Ws Flash power variation 1/128~Full 1/192~Full 1/256~Full 1/512~Full ① Hold Pyrex dome of flash tube with one hand while holding a flash head with the other hand.
- Page 4 Warranty Card For warranty, please fill out this form and mail to Aurora Lite Bank Co., 741-1 Sangyeok-dong, Buk-gu, Dae-gu, 702-101, Korea or fax to +82-53-384-9886. Name Street Address City Zip Code State/Province Country Phone Number Fax Number E-mail Address Purchase Date Where did you purchase this product? Aurora Lite Bank warrants this product to be free of defects in materials and workmanship...
Need help?
Do you have a question about the F-300 and is the answer not in the manual?
Questions and answers