Accessing The Video Input - RCA P52950 User Manual

Thomson/rca projection tv user's guide

Hide thumbs Also See for P52950:

Brochure & specs (4 pages)

Table Of Contents

Table of Contents

Using the Remote

CLEAR Removes any menu or display from the screen and returns you

to TV viewing. Will also exit the Guide system.

(0-9) Number Buttons Enters channel numbers and time settings

directly though the remote control. To enter a two-digit channel, press

the two digits. To enter a three-digit channel, press and hold the first

digit until #-- appears, then add the second two. Example: to tune to

channel 123, press and hold 1 until 1-- appears then press 2 and 3.

WHO•INPUT In TV mode, press to toggle through the available input

sources VID1/SVID1, VID2/COMP2, previous channel and FRNT (front

panel jacks). In SAT mode, press to select available channel lists.

ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver

button in SAT•CABLE mode.

REVERSE, PLAY, FORWARD, REC•VCR+, STOP, PAUSE If programmed,

provides transport control for some remote-controllable VCRs, DVD

players, laserdisc players, tape decks, and CD players. Pressing REC•VCR+

when using the GUIDE Plus+ Gold System sets the VCR to record a

program.

PIP (Picture-In-Picture) Brings up the small picture-in-picture window.

Press again to remove the PIP window. When PIP Caption Display -

Alternate with PIP - has been selected, will toggle between PIP on, PIP

on with closed captions, and PIP off.

SWAP Swaps the main picture with the PIP window.

CH CTRL Selects the picture window, (that is, the main or PIP window)

to be changed by the CH ^ (channel up) or CH v (channel down) buttons.

RESET Resets picture quality controls to the Bright Lighting Picture

Control Preset. Point and select to choose a different Picture Control

Preset.