Step 1: Unpack The Tv; Step 2: Connect Your Tv; Tv Only - RCA P52939 User Manual

Thomson/rca projection tv user's guide
Table of Contents

Advertisement

Setup and Connections

Step 1: Unpack the TV

Make sure to locate the remote control.

Step 2: Connect your TV

There are three types of connections outlined in this section:

TV Only:

The Basic Connection:
Advanced Connections:
Cable information and illustrations are given for each type of connection.
Once you have completed your desired connection you may skip forward
to Step 3.
TV Only
This is a basic connection from an antenna or cable system to your TV.
Connect the cable into the Cable/Antenna jack as shown.
Cables
You will use the following cable to make your connection:
TV
Once you have completed this connection go to "Step 3:
Connect the G-LINK Cable" on page 9.
4
If you're only going to connect the
TV to your home antenna or cable
system.
If you're going to connect the TV to a
VCR or satellite receiver.
If you're going to make multiple
connections, hooking up the TV to
one or two VCRs, DVD player, and a
satellite receiver.
Coaxial Cable: These cables carry audio and video
signal to the TV from an antenna, cable, or
cable box.
CABLE, CABLE BOX, OR ANTENNA
R
L
G-LINK
P
P
Y
R
B
Before You Connect
Protect against power surges:
• Connect all components before
plugging any power cords into the wall
outlet.
• Turn off the TV and/or component
before connecting or disconnecting any
cables.
• Make sure all antennas and cables are
properly grounded. Refer to the Safety
Tips sheet packed with your TV.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents