Contents Important Safety Instructions ..................... 2 Safety ....................................... 2 Warning ....................................2 Identifying the Parts ......................4 Main Unit ....................................4 Remote Control ................................... 4 Preparations.......................... 5 Prepare the Remote Control ............................5 Precautions Concerning Batteries ..........................5 Install Batteries ..................................6 Connections ..........................
Important Safety Instructions 10 Protect the power cord from being walked WARNING on or pinched particularly at the plugs, convenience receptacles, and at the point RISK OF ELECTRIC SHOCK DO NOT OPEN where they exit from the apparatus. 11 Only use attachments/accessories specified CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT by the manufacturer.
Page 4
Should any solid object or liquid fall into • This device complies with Part 15 of the FCC the system, unplug the system and have Rules. Operation is subject to the following it checked by qualified personnel before two conditions: operating it any further. (1) this device may not cause harmful Do not attempt to clean the unit with interference, and ...
Identifying the Parts Main Unit Rear View Top View 1 AC Connect to power. 2 Battery Compartment 3 LINE IN Connect to an external audio device. 4 USB1/USB2 Use this socket to charge your smartphone and tablet PC. 5 FM ANT Remote Control 1 SNOOZE/DIMMER Repeat the alarm.
Preparations 4 FM - Select FM function. 5 SNOOZE Prepare the Remote Control - Repeat the alarm. The provided Remote Control allows the unit to be operated from a distance. - Select a next preset station. Even if the Remote Control is operated within ...
Install Batteries Using USB Charge socket Connect a USB cable( not supplied) to the USB1 or USB2 socket to charge your smartphone or • You can only use AC power as power supply. tablet PC. Batteries ( not supplied ) are for backup purpose. • If the system is unplugged or if a power failure occurs, all settings of the unit will be erased unless there are batteries in the unit and you do not change them while disconnected from a power source.
General Operation ALARM 1 or ALARM 2 buttons on remote control or main unit for a few seconds. The [AL1 ] or [AL2 ] will begin to blink. Power ON/OFF 3 Press the buttons on the remote control or the buttons on main unit to select • When you first connect the unit to the main...
“QAA14AV012” will appear on press VOL +/– to resume normal listening. your Bluetooth device. 3 Select “QAA14AV012” in the pairing list. Select a Preset Sound Effect Display panel shows “BLUET” while the During play, press the EQ button repeatedly to pairing succeeds.
the player's remote control to play music 4 Repeat above steps 1 to 3 for each station stored on the device. you want to store in memory with a preset 1. Pair your device with the player. number. 2. Start to play music via your device (if it supports A2DP).
Specifications General Power Requirements ............................AC120V~ 60Hz Power Consumption ................................25W USB 2.0 Socket ................................5V ,2.1A Output Power ..................................5W x 2 Total Harmonic Distortion ..........................1%(1kHz, 1W) Audio Input Sensitivity ..............................500mV Frequency Response .............................40Hz - 20kHz Tuning Range ................................87.5-108MHz Unit Dimensions (W x H x D) ..........................7.8’’...
Need help?
Do you have a question about the QAA14AV012 and is the answer not in the manual?
Questions and answers