4.0 MECHANICAL INSTRUCTION
Remove all the screws on the main board and audio
board and unplug all the housing of them, then take
the main board and audio board from bottom cabinet.
4. Remove the flex cable on the bottom side.
5. Remove all the screws on the battery board.
Unplug the housing which connect the battery board
and audio board;
And then take out the battery with battery board.
6. Remove 6pcs screws from key board.
7. Remove 6pcs of screws on the display frame.
Carefully open the display frame with the catches by
screwdriver. (There are six catches as shown in the
pictures) Then you can see next picture.