Summary of Contents for movistar SC-397GP-3G
- Page 1 User Manual 3G WCDMA Fixed Wireless Phone Model: SC‐397GP‐3G Trade Mark: MOVISTAR Manufacturer: Shenzhen Lanshuo Communication Equipment Co., Ltd. ...
- Page 2 1. Brief introduction Thanks for purchasing and using our 3G WCDMA Fixed Wireless Phone. This phone adopted many years production experience of our company, based on market requirements, service you lasted style desktop wireless telecommunication products. It can send wireless sms and voice at anytime, anywhere, suitable remote countries or mountains. Please take care below instructions before using this phone: Please charge the battery continuous more than 12 hours for first time using; Do not clean the phone while in operation. Before attempting to clean the Phone, turn the Phone off, disconnect the external power adapter and take out the battery or disconnect the external power supply if used. Before moving the Phone, disconnect the external power adapter or power supply in use. Use a Damp cloth for cleaning. Do not use liquid or aerosol cleaners; Do not hold the antenna. This may affect call quality and cause telephone to operate at unintended power levels; Keep the antenna free from obstructions and position the antenna straight up. This will ensure best call quality; Do not use a damaged antenna. Have this replaced through a qualified technician. Use only antenna approved by the manufacturer. Unapproved antenna may impair the call quality as well as cause damage to the phone; Only use the battery and the power adapter or the Power Supply provided with the Instrument. The instrument might get damaged if any other accessories are used. This will also void the warranty; It is highly recommended to charge the battery before initial use. The battery might have been discharged during storage and delivery; Do not use with car battery. It may lead to electric shock or breakdown. ...
- Page 3 Place the Instrument and the power supply in a properly ventilated place. Do not place the Instrument near high temperature objects, under direct sunlight, near source of water, near fire or near inflammable and explosive materials; Do not place any articles over the instrument; Place the Instrument in a dry place and do not expose to moisture; Place the Instrument away from other electronic devices like TV and Radio to avoid interference; For a better reception, do not place the Instrument in a building with iron or metal roof. Hospitals or health care facilities may be using equipment sensitive to Radio Frequencies. Please ensure that your phone is turned off while in the vicinity of such facilities; Do not use the unit in designated “No Service” area; 2. Main features Suitable for 3G WCDMA 850/1900 MHz and GSM 850/900/1800/1900MHz network; Redial function; Phonebook function; Handsfree function; Handsfree and ringer volume adjustable; Different ring tones and alarm ringers; Backlight LCD with date, time, signal strength and battery volume status icons; Can save, check, delete and call back incoming, outgoing and missed calls; 3. Technology requirements Max power: Max. 2.5W For GSM 850/900; Max. 1.26W For GSM 1800/1900; Max. 0.20W For WCDMA Band I ...
- Page 4 4. Phone description 1. Handset; 2. DC plug socket: connect with AC power; 3. LCD display; 4. OK key: confirm your selection in main menu operation; : press this key to increase the volume during conversation; press this key to turn to up ▲ page during main menu operating; press this key to set alarm during standby state; 6. Menu: press this key to check the menu during standby state; press this key to edit sms in standby state, press to turn left during sms input state; press this key to decrease the volume during conversation; press ▼: this key to turn to down page during main menu operating; 9. Number keys; in standby state, press and hold this key for 3 seconds to turn on the phone, press and : hold this key for another 3 seconds to turn off the phone, 11. Exit: in menu operation state, press this key to exit operation; when new call come, press this key one time to come into “MUTE” state, press this key twice to refuse incoming call; in standby state, press this key to review incoming, outgoing and missed call records; press ： this key to turn right during sms input state; 13. Audio: in standby state, press this key to select ring tones; 14.
-
Page 5: Menu Operation
6. Basic operation 6.1. Make calling 6.1.1. Pick up handset and hear dialing tone, input desired number and press “Send” key the number will be dialed out without any delay, or it’ll dial out after 5 seconds; 6.1.2. Press “Redial” key to dial last dialed number out; 6.1.3. When find desired number in the call list, press “Send” key can dial this number out directly. During conversation, LCD display conversation time, return the handset to the based or press Handsfree key after conversation; 6.2. Pick up calling When new call come, phone ring and LCD display incoming number, pick up handset or press Handsfree key to proceed conversation, return handset to base or press Handsfree key to finish the conversation; 6.3. Redial function Pick up handset or in standby state press “Redial” key, the last dialed number will be dialed out; ... -
Page 6: Troubleshooting
settings; Restore factory settings;); Display(you can press ▲ or ▼ key to select Adjust contrast; Backlight;); Security(you can press ▲ or ▼ key to select different PIN code); Profiles(you can press ▲ or ▼ key to select Normal or Silent); 7.5. Clock You can press ▲ or ▼ key to select Set time; Set date; Time format; Date format; Alarm; ... - Page 7 FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ...
Need help?
Do you have a question about the SC-397GP-3G and is the answer not in the manual?
Questions and answers