Download Print this page

Hitachi FL-701 User Manual

Optional lens.
Hide thumbs

Advertisement

English
Optional Lens User's Manual
Important Safety Instructions
(Always follow these instructions)
Please read this section on important safety instructions before replacing the projector lens.
To prevent accidents during lens replacement and ensure product safety after replacing the
lens, be sure to follow the safety instructions described herein.
● These symbols indicate actions that can result in injury or damage if these operations are
not followed correctly.
Warning
Caution
● These symbols indicate the types of precautions that must followed.
This symbol indicates that
caution must be taken.
This symbol warns of possible
electrical shock.
This symbol indicates an action
that must not be performed.
Warning
■ Make sure to follow the procedure on lens installation and removal
for your safety.
■ Please read this manual and manuals for the
projector to ensure correct usage through understanding.
Incorrect usage could result in fire, an injury or damage.
■ Do not subject the device any shock or impact.
Any shock or impact could result in an injury or damage. The lens projects
out of the device. Take care not to strike it.
This symbol indicates that there is a possibility of serious injury
or even death if the operation is not followed correctly
This symbol indicates that there is a possibility of physical
injury or damage to equipment if the operation is not followed
correctly.
This symbol warns of possible
high heat.
Do not look into the lens.
Do not block the projection light.
1

Advertisement

   Related Manuals for Hitachi FL-701

   Summary of Contents for Hitachi FL-701

  • Page 1

    English Optional Lens User’s Manual Important Safety Instructions (Always follow these instructions) Please read this section on important safety instructions before replacing the projector lens. To prevent accidents during lens replacement and ensure product safety after replacing the lens, be sure to follow the safety instructions described herein. ●...

  • Page 2

    Notice ■ Take care of the lens. • When transporting the lens, protect the lens by attaching the lens cap. • Do not touch the lens to prevent fog or dirt on the lens that could cause deterioration of display quality. •...

  • Page 3

    Important Operation Instructions Warning ■ Do not place the lens in a location subject to direct sunlight or other strong lighting or near heat-radiating equipment. This can cause a fire due to the properties of the lens. It can also cause injury or damage to the lens.

  • Page 4: Specifications

    The following accessories are included with each lens. Lens Model Supplied accessories Lens caps (front and rear) Fixed short throw lens FL-701 Optional Lens User's Manual SL-702 Lens caps (front and rear) Short throw zoom lens Optional Lens User's Manual...

  • Page 5

    Specifications (continued) SL-702 ML-703 Model CP-X8150, CP-WX8240, CP-X8160, CP-X8170, CP-WX8255, CP-WX8265, Supported model CP-SX8350, CP-WU8440, CP-WU8450, CP-WU8451, CP-WU8460, CP-WU8461 Zoom / Focus Motorized Motorized 9:-1 - 1:1 9:-1 - 1:1 CP-X8150 5:-1 - 1:1 5:-1 - 1:1 CP-WX8240 Vertical 9:1 - 1:1 10:0 - 1:1 CP-X8160, CP-X8170, CP-SX8350 Lens...

  • Page 6

    Lens Installation and Removal Please be careful as the methods for lens installation/removal will differ according to model. ■ Compatible Models For CP-X8150, CP-WX8240, CP-X8160, CP-X8170, CP-WX8255, CP-WX8265, CP-SX8350, CP-WU8440, CP-WU8450, CP-WU8451, CP-WU8460, CP-WU8461 Lens Replacement Procedure 1. Return the lens shift to the center position (1) Press the LENS SHIFT button.

  • Page 7

    4. Remove the lens Support the lens, and lower the lens lock lever to the lowest position and remove the lens from the projector. You can move the lever while the upper plate touches lower one. Lens lock lever Caution ■...

  • Page 8

    Lens Installation Procedure 1. Attach the lens (1) Remove the lens cap. Then turn the product label of the lens upward and install the lens in the projector. Lens cap (rear) Product label Caution ■ Installing the lens in the projector with the lens cap on may lead to malfunction. ■...

  • Page 9

    2. Attaching the front cover Insert the front cover into the projector body. Front cover (upper part) Lens Installation and Removal ■ Compatible Models For CP-X8800, CP-WX8650, CP-WX8750, CP-WU8600, CP-WU8700 Lens Installation Procedure 1. Pull out the dust protector knobs to remove it. Dust protector Note Keep the dust protector for future use.

  • Page 10

    Lens Installation Procedure (continued) 2. Remove the front cover Move and slide the front cover up while pressing the front cover from the underside and remove the front cover from the projector. Front cover (upper part) 3. Install the lens (1) Remove the lens cap.

  • Page 11

    Lens Installation Procedure (continued) Caution ■ Installing the lens in the projector with the lens cap on may lead to malfunction. ■ Avoid hitting the surface of the lens on the projector when attaching the lens as this may lead to malfunction. ■...

  • Page 12

    Lens Installation Procedure (continued) Warning ■ To prevent the lens from falling off, after attaching the lens, check that it is securely mounted and that the lens does not move. If the projector falls or topples over, it could result in injury or damage to the projector and the surrounding things.

  • Page 13

    Lens Removal Procedure 1. Return the lens shift to the center position (1) Press the LENS SHIFT button. The LENS SHIFT dialog will appear. (2) Press the ENTER or INPUT button while the dialog is displayed to execute the CENTERING feature, which adjusts the lens to the center. A message dialog is displayed for confirmation.

  • Page 14

    Lens Removal Procedure (continued) 4. Remove the lens Support the lens, and lower the lens lock lever to the lowest position and remove the lens from the projector. You can move the lever while the upper plate touches lower one. Insert the dust protector to prevent any substance getting into the lens installation area.

This manual also for:

Sl-702, Ml-703, Ml-713, Ll-704, Ul-705, Sl-712

Comments to this Manuals

Symbols: 0
Latest comments: