Thank you for choosing a Line Magnetic product. Its implementation has been our know-how, both in terms of design to the manufacturing. Electronic components and mechanical parts correspond to the selection criteria of very high quality. Operation and finish of each product have been checked before delivery. To obtain best results, please read the advice contained in this document.
Please make sure that your local voltage is the same as indicated on the rearpanel. A too low or too high voltage can cause serious damage to your CD Player. In case you find an improper voltage, please contact our company or your local dealer. Package contents 1x LM-215CD 2x Fuses 1x Detachable power cord 1x Remote control...
- Do not attempt to service this product yourself. Opening the cover may expose you to dangerous voltage or other hazards. - Use only spare parts and accessories recommended by Line Magnetic. - We are not responsible for any problems caused by checking and opening without permission of our company.
Keep all packing materials for future use and please fill in the warranty card for registration of warranty. Your Line Magnetic product is covered by the legal warranty in force in your country. You may also have other rights which vary from country to country, state to state.
Functions descriptions Input voltage level of the CD Player is 230VAC ±5% and please, make sure that your local voltage is the same as indicated on the rear panel. A too low or too high voltage can cause serious damage to your CD Player. In case you find an improper voltage, please contact our company responsible for the power supply or your local dealer.
Rear panel Analog output: RCA «OUTPUT L and R» are used for connecting the CD Player to the RCA analog input on your amplifier. These outputs are designed to generate «analog» said signals (as opposed to «digital» signals). Cable compatible with these sockets are of the type «RCA». They are traditionally identified by a color code «RED» to the RIGHT channel and «WHITE»...
Turning on IMPORTANT - BEFORE TURNING ON THE CD PLAYER Startup procedure 1. Please make sure local voltage level is matched with the input level of the units which indicates on the rear panel before connection. Please make sure the unit is powered off before connection. 2.
Basic instructions The CD Player can be operated through the buttons on the front panel or the remote control unit. Following are detailed descriptions for all related functions among which there are some functions you can only control by the remote control. Search Press y or y...
Remote control The CD Player comes with LM-03 remote control. 1 - Open / Close: Open and close the CD tray 2 - Time: Displays the duration of the CD or a track 3 - A-B: Repeating a section 4 - Play / Pause: Playback and pause the disc 5 - y...
Maintenance WARNING As a precaution, it is best to unplug the unit before handling and ensure the heat generated by the product has been properly dissipated. Cleaning 1. Use soft dry cloth to clean the CD Player. 2. Refer to the safety precautions if you are going to use chemically treated cloth for cleaning. 3.
Replace the CD with a readable disc. this disc. The LM-215CD is designed and manufactured with our original parts and reaching the best results. We are not responsible for problems and damages caused by non-original parts replacement in the CD Player.
Need help?
Do you have a question about the LM-215CD and is the answer not in the manual?
Questions and answers