Detailed Message
INTERMITTENT
BATTERY
I
NTERNAL
E
RROR
146
CODE
Reasons
129
Battery connection opened
five times in one minute.
(
)
Display Buffer is full
NONE
Solutions
Check and clean the
battery contacts. Verify
that correct contacts are
used. Verify that the
battery is properly
inserted. Verify that the
C-code is correct for the
battery.
Reduce the charge rate in
extended C-code.
Increase end-of-
discharge voltage.
For intrinsically safe
batteries, use I/S settings
(see (Intrinsically Safe
Batteries, page 57).
Machine will reset in a
few minutes a resume
service. If message
persists, press the Esc
key for a few minutes, the
machine will reboot and
resume service.
This may occur if
QuickTest
(a processing
TM
intensive program) is
used. Start QuickTest
each station after 10
seconds.
Cadex Electronics Inc.
in
TM
Need help?
Do you have a question about the C7200 and is the answer not in the manual?