Advertisement
Quick Links
Advertisement
Summary of Contents for Smartlink SCR2000E
- Page 1 SmartLink SCR2000E Smart Card Reader Installation Manual...
- Page 2 A: Hardware Installation Connect to an available PS/2 connector of your PC. Then connect your PS/2 Mouse/Keyboard to the extension slot at the other side of the connector if necessary. Connect to an available 9-Pin com port.
- Page 3 B. Driver Installation in Windows 98 environment. After connecting SmartLink SCR2000E, power your PC on, windows system will find the new hardware and will guide you to install the device driver. (As shown in the picture) Click “ Next > ” to continue.
- Page 4 Select “Floppy disk drives” option. And insert the installation diskette into an available Floppy disk drive. Click “Next >” to continue. Windows will find the driver for “SmartLink SCR2000E Smart Card Reader”. Click “ Next > ” to continue.
- Page 5 Windows has finished the installation of the driver. Click “Finish” to complete.
Need help?
Do you have a question about the SCR2000E and is the answer not in the manual?
Questions and answers