Removing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Remove the
computer
Procedure
1
Disconnect the data cable and power cable from the optical-drive assembly.
2
Disconnect the data cables and power cables from the hard-drive assembly.
3
Remove the two screws (#6-32xL6.35) that secure the drive cage to the
chassis.
32
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before