Electro-Voice EVID C4.2 Installation Manual page 13

From amplifier or
previous speaker
Figure 9: Parallel wiring
From amplifier or
previous speaker
Figure 10: Daisy-chain wiring
INSTALLATION NOTE: SUBWOOFER POLARITY
When adding a subwoofer, be sure to observe the correct polarity. The C10.1 subwoofer has
been designed for optimum performance when used with the C4.2. In order to maximize the
low frequency output when used with the C8.2, C8.2LP or C8.2HC, the polarity of the C10.1
subwoofer should be reversed. See Figures 11 and 12.
C10.1 Subwoofer
Figure 11: Subwoofer polarity with C4.2
C10.1 Subwoofer
Figure 12: Subwoofer polarity with C8.2/C8.2HC/C8.2LP
When all wiring has been completed to the connector, plug the input connector (A) into the
socket in the speaker's terminal cup (B). See Figure 13. Tighten all screws to eliminate
vibration.
Electro-Voice
To next speaker
To next speaker
C4.2 Loudspeaker
C8.2/C8.2HC/C8.2LP
Loudspeaker
Installation Manual
en 13
2016.05 | 09 | F.01U.177.705