Safety Information; Responsibilities; Safety Regulations - Landis & Gyr 5235 User Manual & Technical Information

Safety Information

2 Safety Information
2.1

Responsibilities

2.2

Safety Regulations

5235 Single Phase Credit Meter – User Manual & Technical Specification
Issue: 4 5
Attention is drawn as follows in the individual chapters of this user manual
with classified word symbols and pictographs to the relevant danger level,
i.e. the severity and probability of any danger:
Definition of Danger
This symbol is used to indicate a possibly dangerous situation which could
result in severe physical injury or a fatality.
Definition of Warning
This symbol is used to indicate a possibly dangerous situation which could
result in minor physical injury or material damage.
Definition of Note
This symbol is used to indicate general details and other useful information.
In addition to the danger level, all safety information also describes the type
and source of the danger, it's possible consequences and measures to
counteract the danger.
The owner of the meters – normally the utility – is responsible that all
persons engaged on work with meters:

Have read and understood the relevant sections of the user manual.

Are sufficiently qualified for the work to be performed.

Strictly observe the safety regulations (according to section 1.6) and
the operating information in the individual chapters.
In particular, the owner of the meters bears responsibility for the protection
of persons, prevention of material damage and the training of personnel
(Landis+Gyr. provides training courses for this purpose on specific
equipment; please contact the relevant agent if interested).
The following safety regulations must be observed at all times:

This equipment does not contain a disconnection device. Means for
disconnection from the supply must be provided as part of the
building installation. Do not work on the equipment unless the
Page 7 of 21
© Landis+Gyr