Advertisement
USER'S MANUAL FOR
AT-900
AT-900T Dual Tour Guide System
AT-900R The receiver
1. General Information
1.1 Introduction
The "AT-900T" and "AT-900R" are the components for a very advanced tour guide system.
It combines quality and versatility into the most compact, simple to operate and easy to use with state of the
art technology.
1.2 Main Feature
• Worldwide compatible 2.4Ghz ISM band solution
• Support the use of two units of AT-900T transmitters per group simultaneously. So a group can be guided
by the tour leader and a local tour or city guide
• Long range of talk coverage over 100m
• 80 channels selection and 9 steps volume output control
• Direct 5 steps microphone sensitivity selection and AUX In for publishing with music background
• Crystal clear sound quality, loud enough audio output and two earphone outputs as Ear.1 and Ear. 2
• Extremely compact 50x88x15mm and light weight 60g only
• Long enough battery life for the AT-900T transmitter 10 hours and for the AT-900r receivers 15 hours
• Convenient drop in charging contact and micro USB charging socket
Advertisement
Table of Contents
Summary of Contents for Axitour AT-900T
- Page 1 1.2 Main Feature • Worldwide compatible 2.4Ghz ISM band solution • Support the use of two units of AT-900T transmitters per group simultaneously. So a group can be guided by the tour leader and a local tour or city guide •...
- Page 2 2. Controls and Indicators 2.1 AT-900T transmitter 2.2 AT-900R Receiver...
- Page 3 3.5 ID selection on AT-900 In a group, it is available to use up to 2 units of "AT-900T" at the same time and each "AT-900T" needs to provide each different ID per group as one is ID "00" and another is ID "01".
- Page 4 Note) Every group needs to have a master "AT-900T" with the ID "00" . In case you want to use another "AT-900T" with the ID "01" in a group beside of the master "AT-900T" with its ID "00", if it is required.
- Page 5 The Mute function is out as a default 4. Battery The rechargeable Li-Ion battery 3.7V, 800mA is installed in each device, AT-900T and AT-900R. Plug the USB charging cable into the USB port and recharge the battery. The Red color LED in the right side top corner of device is turned on during the charging and turned off when the battery is fully charged.
Need help?
Do you have a question about the AT-900T and is the answer not in the manual?
Questions and answers