Advertisement
3.12.
testing trailer lamps and connections (fig.11).
3.12.1.
set the selection switch to 'test' position.
3.12.2.
connect the unit to a battery of the correct voltage for the trailer electrical system.
3.12.3.
clip the auxiliary earth lead to an earth on the trailer chassis.
3.12.4.
Probe the contacts of the trailer's electrical connection socket whilst pressing the test switch to the single bar 'PositiVe' position. this
will allow you to check the function and orientation of the trailer lighting system.
4. spare part
Description
Probe
eNviroNmeNt protectioN
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey Group, Kempson Way, suffolk business park, bury st edmunds, suffolk. ip32 7ar
01284 757500
© Jack sealey limited
fig.11
part Number
PPVt.01
Parts support is available for this product. Please log on to
www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500
01284 703534
Original Language Version
sales@sealey.co.uk
www.sealey.co.uk
PPVt
issue 2 (H, f) 23/02/18
Advertisement
