Page 2
Instructions CoolPower 36 Please read instructions carefully before using your CoolPower36. Keep instructions in a safe place for future reference. Index 1 Before first use………...…………………………….……………………….. 3 2 Installation and operation………………………………………...………... 3 3 Fridge running time………………………………………………………….. 3 4 Testing…………………………………………………………….……………. 4 5 Charging……………………………………………………………………….. 4 6 Depth of discharge v’s battery life……………………………….………..
Page 3
Fit the charge lead screw terminal to the battery ‘CHARGE’ socket and plug the other end into the vehicle cigarette socket. If the WAECO Fast Charge Kit, RAPS12R-U has been fitted to the vehicle (recommended), connect the charge lead from the battery to Fast Charge Kit socket.
Page 4
(recommended) into the WAECO RAPS12R-U fast charge kit socket pre-fitted to your vehicle. When the CoolPower is accepting charge from your vehicle battery, the green LED adjacent to the ‘CHARGE’...
Page 5
Instructions CoolPower 36 Before turning the battery charger on, connect the alligator clamps to the + and – posts at the top of the CoolPower36, ensuring good contact. Now turn the charger on. Charging times will vary depending on depth of battery discharge prior to charging, but as a guide, assuming 80% discharge it will take the following times: Charger...
Page 6
Not fully charging in-car i) Check connections – ensure they are secure and clean ii) Is the WAECO RAPS12R-U Fast Charge Kit fitted? If not, the vehicle wiring may not be heavy enough to deliver adequate charging current. Fit RAPS12R-U to vehicle.
Need help?
Do you have a question about the RAPS 36 and is the answer not in the manual?
Questions and answers