Subscribe to Our Youtube Channel
Summary of Contents for Maximum 058-9373-2
- Page 1 Air-Powered Gravity-Feed HVLP Spray Gun Model no. 058-9373-2 IMPORTANT: INSTRUCTION Please read this manual carefully before MANUAL using this product, and save it for reference.
- Page 2 TABLE OF CONTENTS TECHNICAL SPECIFICATIONS SAFETY GUIDELINES KEY PARTS DIAGRAM TECHNICAL INFORMATION OPERATING INSTRUCTIONS MAINTENANCE TROUBLESHOOTING EXPLODED VIEW PARTS LIST WARRANTY NOTE: If any parts are missing or damaged, or if you have any questions, please call our toll-free helpline at 1-888-670-6682.
-
Page 3: Technical Specifications
058-9373-2 | contact us 1-888-670-6682 TECHNICAL SPECIFICATIONS This manual contains information that relates to PROTECTING PERSONAL FLUID DELIVERY Gravity SAFETY and PREVENTING EQUIPMENT PROBLEMS. It is very important to read this manual carefully and understand it thoroughly before using NOZZLE 1.4 mm... - Page 4 058-9373-2 | contact us 1-888-670-6682 • Do not use oxygen or any other combustible or bottled gas to Risk of personal injury. Do not direct compressed air from the power air-powered tools. Failure to observe this warning air hose towards the user or other persons.
-
Page 5: Maintenance
058-9373-2 | contact us 1-888-670-6682 Keep proper footing at all times in order to ensure correct balance. • Use compressed air at regulated pressure: Always Do not use a tool that is leaking air, that has missing or damaged parts, use clean, dry, and compressed air at the regulated or that requires repairs. -
Page 6: Warranty
® tools. The compressor should be able to supply a minimal air delivery of 5.1 CFM @ 40 PSI to ensure it can run continuously with the MAXIMUM ® Air-powered Gravity-feed Spray Gun. Using tools or combinations of tools... -
Page 7: Air Adjusting Knob 1
Rotate the air adjusting knob clockwise to reduce the output volume of air loss of life. and rotate the knob in a counter-clockwise direction to increase the output • Do not exceed the maximum pressure for the Air- volume of air. powered Gravity-feed Spray Gun or any other parts in the compressor system. - Page 8 058-9373-2 | contact us 1-888-670-6682 OPERATION • The speed of the stroke, the distance from the work surface, Fig. E and the setting of the paint adjusting knob vary the amount 1. Plug in compressor, turn it on, set the of paint being applied.
- Page 9 058-9373-2 | contact us 1-888-670-6682 Care of spray gun Fig. I MAXIMUM SERVICE INTERVAL TOOLS OR The spray gun should be cleaned at every use. MAINTENANCE DESCRIPTION MATERIALS Each use or The paint remaining inside the gun thickens and...
-
Page 10: Fluid Nozzle 1
058-9373-2 | contact us 1-888-670-6682 Troubleshooting PROBLEM POSSIBLE CAUSES SOLUTIONS The following chart lists common issues and solutions. Please read it Pattern is not Paint has built up on Clean or replace air cap. carefully and follow all instructions closely. - Page 11 058-9373-2 | contact us 1-888-670-6682 Description Description Air adjusting screw Compression spring Air adjusting knob Big washer O-ring 2.5 x 2.1 Trigger pin I Washer Trigger pin II Air inlet spring Trigger Air inlet valve Snap retainer Switch spring...
-
Page 12: Filter
058-9373-2 | contact us 1-888-670-6682 This MAXIMUM product is guaranteed for a period of 5 years This warranty will not apply to any parts other than original parts, from the date of original retail purchase against defects in... - Page 13 Maximum Canada will maintain this product and replace critical parts Neither the retailer, Maximum Canada, nor the manufacturer shall be liable for which have worn beyond reasonable use through normal use of such any other expense, loss or damage, including, without limitation, any indirect, product, any time during the first year after purchase.
Need help?
Do you have a question about the 058-9373-2 and is the answer not in the manual?
Questions and answers