Related Manuals for Hamilton/Buhl ALS700
Summary of Contents for Hamilton/Buhl ALS700
-
Page 1: User Manual
ALS700 Assistive Listening System USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE. -
Page 2: Compliance With Fcc Regulations
CAUTION Follow the advice below for safe operations. Stop operation immediately if any liquid or solid object should fall into the cabinet. If the unit is not to be used for a long period of time, make sure that all power ... -
Page 3: Preparation For Use
The System offers great auditory reception without seating confinements. The ALS700 connects to the line out from a tape player or from an existing sound systems and broadcasts the audio as a FM radio signal. -
Page 4: Location Of Controls
LOCATION OF CONTROLS ALSM700 TRANSMITTER... - Page 5 ALSR700 RECEIVER LINE IN JACK CHANNEL BUTTON DC 5V JACK PHONE JACK MICROPHONE INPUT CH1. INDICATOR TELESCOPING ANTENNA CH2. INDICATOR POWER ON/OFF SWITCH GAIN CONTROL KNOB POWER INDICATOR POWER ON/OFF SWITGH SIGNAL INDICATOR BELT CLIP CH1 & CH2 INDICATORS BATTERY COMPARTMENT CHANNEL BUTTON VOLUME CONTROL...
-
Page 6: Powering The Transmitter
ALSM700 TRANSMITTER The ALSM700 Transmitter operates using the supplied AC Adapter (Operate at 120V ~ 60Hz) POWERING THE TRANSMITTER NOTE: Only use the supplied adapter Insert the DC plug of the AC adaptor provided into the DC 5V jack (#2) on the back panel of the transmitter. - Page 7 ALSR700 RECEIVER FEATURES & CONTROLS Gain control Channel button CH1 & CH2 indicators Power Switch Phone jack POWERING THE RECEIVER Install “AAA” size x3pcs in battery compartment (#18) on the back of the receiver. Observe polarity. To preserve battery life, always turn ALSR700 receiver off when not in use.
- Page 8 Turn on the receiver with the POWER SWITCH (#16) and CH1 indicator (#13) will be solid light up when receive the signal from ALSM700 transmitter CH1, the indicator will flash light when the transmitter isn’t to setting in CH1. Press the CHANNEL (#11) button to changing the receive channel.
- Page 9 Connectors ………… 3.5mm jack for earphone output Earphones …………. 16 ohm Mini binaural earbuds Antenna ……………. Integral with earphone cord Indicators ……………CH1 LED, CH2 LED. Sensitivity ………….. 10uV for 30dB S/N ratio Power Requirement…1.5V x3 pcs. AAA size battery Dimensions ………… 99.5 mm.(H) x 64 mm.(W) x 33 mm.(D) Weight ………………...