Smoke Detector Features And Operation; Smoke Detector (Sw-Att-Smkt) Operation; Replacing The Smoke Detector (Sw-Att-Smkt) Batteries - AT&T DLC-100 User Manual

Smoke Detector Features and Operation

Smoke Detector Features and Operation
Your Smoke Detector (SW-ATT-SMKT) is a monitored device that emits loud local
smoke alarms, which are three (3) short beeps then silence repeating, whenever it
detects smoke. It also transmits a smoke alarm to the DLC-100 and continues
transmitting smoke detector signals every twenty (20) seconds as long as it is detecting
smoke.
WARNING!
The Digital Life System supports the Fire Alarm Verification feature for use
with smoke detectors, which can be utilized to delay the transmission of a smoke alarm
to the AT&T Digital Life Central Monitoring Center. In order to reduce the likelihood of
reporting false smoke alarms, the Fire Alarm Verification feature can be used. The DLC
alarm verification period is twenty (20) seconds. If the Fire Alarm Verification feature is
enabled, the Digital Life Controller (DLC-100) waits for two (2) smoke detector signals
within 90 seconds before a smoke alarm is reported to the AT&T Digital Life Central
Monitoring Centering.

Smoke Detector (SW-ATT-SMKT) Operation

The Smoke Detector (SW-ATT-SMKT) LIGHT flashes every 9 seconds to indicate
normal operation. When the LIGHT is ON, smoke is being detected. When the LIGHT is
OFF, there is a trouble condition or maintenance is required.

Replacing the Smoke Detector (SW-ATT-SMKT) Batteries

CAUTION: Opening the battery compartment door when the system is armed triggers
the transmission of a tamper alarm to the AT&T Digital Life Central Monitoring Center.
Therefore, in order to prevent a false alarm, please ensure that the system is disarmed
prior to opening the battery compartment door to replace the batteries.
Digital Life User Manual |
Page 28 of 62
ATT-UM-V1.1-201303