Breville Control Grip User Manual page 12

6. Ensure the blade has completely stopped
before removing the lid from the chopping
bowl. Carefully remove the chopping blade
and use a spatula to scrape off any attached
food back into the chopping bowl. Use the
spatula to remove food from the chopping
bowl.
To detach the chopping bowl and lid
Ensure the trigger switch is released and
unplug the power plug from the power outlet.
Hold the motor body with one hand and using
thumb and finger of the other hand, press on
the two EJECT buttons on either side of the
motor body. Pull the motor body away from the
chopping bowl lid to detach.
Recommendations when using the stick
blender with the chopping bowl
• Do not operate the chopping bowl
when empty.
• The anti-slip mat keeps the chopping bowl
stable, however it is recommended during
processing to hold the motor body with one
hand and the chopping bowl and lid with
the other.
• When processing, cut food into uniform sizes
to ensure quicker, even and more consistent
results.
• To avoid damage to the chopping/mixing
blade, do not process, or grind hard items
such as frozen foods, ice, cereals, rice, spices,
chocolate bars or coffee beans.
• DO NOT process boiling or hot foods in the
chopping bowl.
• NEVER remove the blade from the chopping
bowl before food processing is completed.
• The chopping bowl blends foods and liquids
rapidly, therefore it is easy to over process.
Remember to periodically release the trigger
switch and check food throughout operation.
12
BSB510XL_IB_B16.indd 12
WHISK
To attach the whisk
Remove blending shaft from motor body
(follow the instructions on page 10 "To detach
the blending shaft").
Align the top end of the whisk gearbox with
the corresponding end of the motor body and
push until the whisk 'clicks' and locks onto the
motor body.
Ensure the whisk gearbox is dry with no water
left inside before re-attaching.
To use the whisk
Ensure the whisk is completely and properly
assembled.
1. Place food to be whisked into the blending
jug or a sufficiently large mixing bowl or
container.
2. Insert the plug into a 110/120V
power outlet.
3. By turning the speed control dial at the
top of motor body, select a speed between
1 and 15.
Low Speed : 1
High Speed : 15
7/11/2016 1:33 PM