Welcome to Fetch Simple Remote Set Up Direct Remote Set Up Controlling the TV Volume TV Power and AV Reset remote to control Fetch Box only To find out your TV brand & code from A to Z...
Simple Remote Set Up Welcome to the Fetch remote setup guide. Follow the Simple Remote Set Up steps to program your Fetch remote to control your TV. If the Simple Remote Set Up doesn’t work, try the Direct Remote Set Up.
TV off and back on. • If this doesn’t work, repeat from Step 1 using the next code on the list for your TV brand. • If you have turned the TV back on using the Fetch remote, the setup has worked.
Controlling the TV Volume Volume Up Mute – Toggles the sound on/off Volume down Switch control from the TV to the Fetch box: Hold down until the remote flashes twice. Switch control from the Fetch box to the TV: Hold down...
TV Power and AV Fetch Power Press to turn on/off Fetch box. TV Power Press then press to turn on/off TV. AV Source: Press then press to change the input source, e.g. HDMI switch on TV. Some buttons may not work with your TV. You may wish to try each code through...
After you press the 9 button, then the 7 button and then the 7 button again, the remote will flash four times. If you want to program the Fetch remote to control your TV again, follow the Simple Remote Set Up process. (page 3).
TV brand & code from A to Z Find your TV brand from the list and use corresponding code to setup your remote. Brand Code A.R. Systems 1696, 0037, 0373, 0556, 0352, 0374, 0455 Accent 0009, 0037, 0556 Acer 1339, 1509, 1403, 1644 Acoustic Solutions 1149, 1523, 1037, 1865 Adcom...
Need help?
Do you have a question about the Remote 3 and is the answer not in the manual?
Questions and answers