WARNING : A source of fresh air into the room or space heater shall be
provided when required.
-
operating the stove with the end slide plate off will burn pellets faster and
outside air will not pass through the stove properly
-
The possible effects of room air starvation, icing, exhaust fans, etc and the need
for adequate ventilation has to be considerd when running the stove
-
CAUTION : DO NOT CONNECT TO OR USE IN CONJUNCTION WITH ANY AIR
DISTRIBUTION DUCTWORK UNLESS SPECIFICALLY APPROVED FOR SUCH
INSTALLATIONS.
CAUTION : DO NOT USE CHEMICALS OR FLUIDS TO START THE FIRE
CAUTION : DO NOT BURN GARBAGE OR FLAMMABLE FLUIDS SUCH AS
GASOLINE, NAPTHA OR ENGINE OIL.
CAUTION : HOT WHILE IN OPERATION. KEEP CHILDREN, CLOTHING AND
FURNITURE AWAY. CONTACT MAY CAUSE SKIN BURNS.
TEMPATURE CONTROL:
Because the dampener is located behind the burn chamber, adjusting the
temperature is the opposite of how you would normally adjust a fire stove. Open
the dampener to cool the temperature, close the dampener to increase the
temperature. Open the dampener by loosening the dampener handle, counter
clockwise to loosen, clockwise to tighten.
THE DAMPENER HANDLE! THIS MAY CAUSE THE HANDLE TO SEPARATE FROM
THE DAMPENER PLATE.
slide the dampener plate open or closed. For maximum primary air flow slide
13
CAUTION – DO NOT OVER LOOSEN
Only turn approximately one half turn, just enough to
Need help?
Do you have a question about the GW-1949 and is the answer not in the manual?