Tv + Vcr - RCA F27718, F32718, F36718, MR68R718 User Manual

Connections & Setup

TV + VCR

1. Connect your TV to your VCR
2. Connect cable or antenna to your VCR
3. Connect the G-LINK cable to the TV
8
TV (back panel)
VPORT
1C
G-LINK
1B
3
VCR
VIDEO
OUT
R
IN
R
A. Connect a coaxial cable to the CABLE/ANTENNA jack on your TV and to the Output Jack on
your VCR (sometimes labeled OUT TO TV).
B. Connect the audio/video cables. Connect audio cables (white and red) to the INPUT1 AUDIO
R and L jacks on the back of the TV and to the Audio Output Jacks on the VCR (sometimes
labeled OUT R L).
C. Connect the video cable (yellow) to the INPUT1 VIDEO jack on the back of the TV and to the
Video Output Jack on the VCR.
Connect the coaxial cable from your cable outlet or antenna to the Input Jack on your VCR
(sometimes labeled IN FROM ANTENNA or IN FROM ANT).
If you haven't already done so, remove the Demo Pin from the G-LINK jack. Then, connect the
G-LINK cable to the G-LINK jack on the TV. Next step, place one of the wands of the G-LINK
cable to work with your VCR (instructions are on page 14).
VIDEO R-AUDIO-L
P
Y P R
B
VIDEO R-AUDIO-L
R L
AUDIO
IN FROM ANT
L
OUT TO TV
L
CABLE/
ANTENNA
1A
CH3
CH4
2
From Cable
or Antenna
Go to page 14
Chapter 1